an end device
dry-type
a communication device
It is called a device driver.
This is the definition of a "peripheral" device, such as a scanner, printer, or other input or storage device.(A "plug-in" normally applies to software additions to a computer program.)
The height of collimation is the height of the line of sight. It is the vertical distance of the horizontal plane through a telescope.
Collimation is used for telescopes to make sure the telescopes are perfectly aligned. The reflector will not produce the best image if the aligned is not just right.
Collimation Error: Collimation error occurs when the collimation axis is not truly horizontal when the instrument is level. The effect is illustrated in the sketch below, where the collimation axis is tilted with respect to the horizontal by an angle α: Figure ( ) In this particular example, the effect is to read too high on the staff. For a typical collimation error of 20", over a sight length of 50m the effect is 5mm. If the sight lengths for back sight and foresight are equal, the linear effect is the same for both readings. When the height difference is calculated, this effect cancels: δh = (b + s. α) - (f + s. α) = b - f That is, the effect of the collimation error is eliminated if sight lengths are kept equal.
This term is used in surveying. 'Height of collimation' means height of instrument.Generally this term is used while doing levelling i.e. Measuring elevation of given point.
it is line set out by the optical axis of the instrument ( level). so it is just an imaginary line that describes the ray of light that allowes us to read different values from the leveling staff. this term arose from the fact that in differential leveling in surveying we must construct horizontal line of sight, but due to collimation error the collimation line (i.e. line of sight) will not be 100% horizontal (by horizontal we mean tangent the level surface at the instrument position), instead it will be slightly deviated. so what we are looking to achieve when we eliminate the collimation error (using the 2 peg test) is a horizontal line of collimation.
error in alignment between the optical axis of a telescope & the declination. it is line set out by the optical axis of the instrument ( level). so it is just an imaginary line that describes the ray of light that allows us to read different values from the leveling staff. this term arose from the fact that in differential leveling in surveying we must construct horizontal line of sight, but due to collimation error the collimation line (i.e. line of sight) will not be 100% horizontal (by horizontal we mean tangent the level surface at the instrument position), instead it will be slightly deviated. so what we are looking to achieve when we eliminate the collimation error (using the 2 peg test) is a horizontal line of collimation.
A type of device that a computer sends information to.
is to eliminate collimation error
A microphone is an input device.
an end device
clock is type of measuring device that you can use to see the time
floating device