daughter card or daughter board
Runner : A channel through which molten metal or slag is passed from one receptacle to another; in a mold, the portion of the gate assembly that connects the downgate or sprue with the casting ingate or riser. The term also applies to similar portions of master patterns, pattern dies, patterns, investment molds and finished castings.Riser : Reservoir of molten metal from which casting feeds as it shrinks during solidification.
Another name for ripple is undulation.
If I'm not mistaken they raise the motherboard up so it is not touching the case.
Another name for BIOS is Firmware or Basic Input/Output System. -PSPSlimBoy Or ROM -lejimal07
hot plugging
Aka: riser card. A riser card is a circuit board containing expansion slot(s) which allows expansion card(s) to be re-oriented and/or moved to another position relative to the motherboard. A typical riser card rotates an expansion card/slot through 90 degrees so that the card/slot is parallel to the motherboard. A riser card may be used to: - Rotate an expansion card through 90 degrees to face left or face right. - Shiftposition of an expansion card up and/or sideways.
Aka: riser card. A riser card is a circuit board containing expansion slot(s) which allows expansion card(s) to be re-oriented and/or moved to another position relative to the motherboard. A typical riser card rotates an expansion card/slot through 90 degrees so that the card/slot is parallel to the motherboard. A riser card may be used to: - Rotate an expansion card through 90 degrees to face left or face right. - Shiftposition of an expansion card up and/or sideways.
LPX or mini LPX uses a riser card ( also called a bus riser or daughter card). LPX motherboard has the riser card near the center, whereas the NLX motherboard has the riser at the edge of the board.
also called: bus riser daughter card
A riser card, also known as "bus riser" or "daughter card". These are used in certain Form Factors such as LPX / Mini-LPX / NLX & Backplane Systems. In these particular Form Factors, the motherboard contains only one expansion slot, in which a riser card is mounted. The riser card contains connectors for the floppy and hard-drives, and the expansion cards are then mounted on the riser card. FOR THE TEACHERS You can't make the students learn better by changing the answer to the wrong one. The humanity is positively progressing much faster because the internet taught people how to share the knowledge. By changing the answer to the wrong one you will only succeed in producing more Ds Progress is= to knowledge share, do not slow it down!!! AVD P.S. A student is here because either he/she is not interested in a subject or a teacher is not good.
PCI express
The NLX form factor has a riser card on the edge of the motherboard.
* A heat riser valve
Two common names are a "newel" post and a "riser". Or stringer
NLX
Communications and Networking Riser card, usually found on PCchips and ASRock motherboards.
Another name for graphics card is video card.