A kinetic machine without gears.
The transmission is unreliable after the bend radius is exceeded.
easy for transmission of data data can be cracking can be dertermine
because it is cost effective. we use just one wire for transmission
The transmission fluid dipstick on a 2005 Lincoln LS V6 is located on the left side of the engine. It connects directly to the transmission through a long filler tube.
Transmission lines are thicker than TV cable wires because the transmission lines are used to transmit both low freq and high freq signals. And the losses of the transmission lines depend the resistance of the line which inturn depend upon length and area. As we have to transmitt the signals over long distances the transmission lines are thicker in size.Whereas in TV cable wires the construction is totally different in which transmission of signals is in between two conductors thereby avoiding losses.Therefore there is no necessity for these lines to be made thicker. That is why transmission lines are thicker than TV cable wires.
Gearless is better because of the loss of energie in de gearbox.
There are multiple styles of transmissions. There is the average automatic and standard (or manual) transmissions. And then there is the sequential transmission, which is essentially an automatic, but also gives the driver the ability to shift gears manually without the use of a clutch. And finally there is the CVT or continuously variable transmisson, which is a gearless transmission that works with a belt and variable pulleys.
a geared motor has gears to to give different power and speeds as in a car a gearless motor is a direct drive that uses the speed of the engine only for power and speed when driven, such as in boat
No, the electric train are gearless. They do not have have gears in their transmissions.
An Indian citizen can get his/her first driving license at the age of 16. But the engine capacity of that particular vehicle should not exceed 50cc. It mostly used to be gearless scooter. But now that model is no more available in the market.
The draisine aka boneshaker aka hobbyhorse was a true gearless bike
A gearless vessel is a type of cargo ship that does not have onboard cranes or gear systems for loading and unloading cargo. Instead, it relies on shore-based equipment, such as cranes at ports, to handle its cargo operations. These vessels are typically designed for transporting bulk goods or containers and are often more efficient in terms of weight and design since they do not carry the extra machinery. Gearless vessels tend to have a larger cargo capacity compared to geared vessels.
geared shipship equipped with own derricks or cranes for cargo operationsopposite of gearless ship
To apply for a gearless (automatic) license, you typically need to follow these steps: first, check your local motor vehicle department's website for specific requirements and application forms. Next, complete any necessary driver's education or training programs, and then schedule a driving test, if required. Make sure to gather required documents, such as identification and proof of residency, before submitting your application. Finally, pay any applicable fees and pass the necessary tests to obtain your gearless license.
A geared motor combines an electric motor with a gearbox, which reduces speed and increases torque, making it suitable for applications requiring high power output at lower speeds. In contrast, a gearless motor, or direct drive motor, connects the motor directly to the load without intermediate gearing, allowing for higher efficiency, reduced maintenance, and quieter operation. Each type has its advantages depending on the application, such as precise control in gearless motors versus high torque in geared motors.
The first Elevonic 401 gearless lift was installed in the Burj Khalifa in Dubai, United Arab Emirates. This lift system, developed by thyssenkrupp, is notable for its advanced technology and high speed, making it suitable for one of the tallest buildings in the world. The installation contributed to the building's efficiency and passenger experience.
Gearless ratchets operate using a mechanism that allows for rotation in one direction while preventing motion in the opposite direction. Typically, they consist of a pawl and a ratchet wheel, where the pawl engages with the notches on the wheel to allow movement in one direction. When the wheel tries to rotate in the opposite direction, the pawl locks into place, preventing backward motion. This design enables efficient, quick adjustments without the need for gears.