systems are running in fibre optic connection
Ethernet and modem.
ARP
The Ethernet has been successful because it has technology which is compatible with many devices. The networking technology needed is also affordable to most households and businesses.
Unshielded Twisted Pair (UTP) cables are designed for two) communication, enabling data to be sent and received simultaneously. This is especially true for most modern UTP cables, such as those used in Ethernet networks. Key Points: **Bidirectional Communication**: UTP cables support full-duplex communication, meaning they can handle data transmission in both directions at the same time. *Ethernet Use*: Commonly used in Ethernet networks, UTP cables can be found in various categories (Cat5, Cat6, etc.) each supporting different speeds and frequencies. *Twisted Pair Design*: The twisting of pairs helps reduce electromagnetic interference (EMI), allowing for clearer and more reliable data transfer.
another name for an ethernet cable is a cat5 or cat5e cable
With full duplex communication, there is no need for CSMA/CD because it is possible to send and receive data at the same time. It's only with half duplex communication that this would be needed.
Gigabit Ethernet is also known as 1000 mega bits per seconds (Mbps). It is a part of the family of Ethernet computer networking and communication standards.
Ethernet and modem.
Not that I am aware of. Ethernet and POTS (Plain Old Telephone System) are two completely different methods of communication.
ARP
The number of Ethernet cords that can plug into a modem at one time depends on the modem's design and the number of available Ethernet ports. Most consumer modems typically have 1 to 4 Ethernet ports. If more connections are needed, an Ethernet switch can be used to expand the number of available ports.
Ethernet switches are used to make possible communication between different network meaning, switches create networks. Also switches use different mechanism of forwarding communication between computers as well as it does not share one channel for multiple computers.
Yes, padding is needed for an Ethernet frame if the IP packet is only 60 bytes and the Length/Type field (LCC) is not in use. Ethernet frames must be at least 64 bytes in total, including the header and trailer. Since the Ethernet header is 14 bytes and the trailer (Frame Check Sequence) is 4 bytes, the total without padding is 78 bytes. Therefore, 0 bytes of padding are needed because the total frame size exceeds the minimum requirement.
Ethernet cables are the most common type of communication cable. Other types of communication cables are telephone and DSL cables.
throughprotocol: modbus,profibus,tcp/ip.................commnucation medium : leased lines,Ethernet,Optical fiber communication,VSAT communication.
On a Mac, as on everything else, PPPoE is used to configure Point to Point Protocols over Ethernet which allows communication between computers connected on an Ethernet network.
The Ethernet has been successful because it has technology which is compatible with many devices. The networking technology needed is also affordable to most households and businesses.