Onboard USB are USB ports built into the motherboard.
The usb cable extension is made by another usb cable. The cable is made with one usb connecter and 1 usb connecter. You can simple attach the extender cable to your usb.
No, there is no difference in b type female connectors for usb 1 or 1.1 or 2
a USB laser pointer is simply a laser pointer powered by the USB socket.
Perhaps a computer processing unit from about 2010.
A keyboard which is connected to the computer by use of a USB cable
A couple of reasons;A required driver is missingThe onboard flash memory in the MP3 player is corrupt.Your USB port is shot.Your MP3 Players USB port is shot.
There are no perfect rhymes for the word onboard.
415 people where onboard
No, it has onboard LAN and 6 channel audio and supports 8x AGP but has no onboard video
An onboard LAN is a built-in ethernet adapter on mother board, if you have an onboard LAN, then, there is no need to install another ethernet card for your purpose.
A first generation iPad can edit photos, but cannot have a USB camera connected to it for live picture taking. The 2nd and 3rd iPads have 2 cameras onboard, and can have cameras connected to them for importing photos and videos. Apple sells the Camera Connection Kit, which consists of a USB-to-dock adapter and a SD Card-to-Dock adapter.
Yes, it is possible to have two ethernet ports on a laptop. While there is no laptop that I am aware of that comes with two, you can still add a second device. Ethernet adapters come in both PC Card and USB varieties, so assuming you have a free USB port or PC Card slot you can simply plug one in. In this configuration, you can use the onboard network adapter, and the USB/PC Card adapter at the same time.
No matter what motherboard you have, it does not have onboard graphics. Only certain processors have built-in graphics.
Operator/owner
When onboard and facing the front of a boat, the starboard side is on the right side.
A MIDI controller sends MIDI note messages to another device by MIDI cables or USB to a computer. If it is strictly a MIDI controller with no onboard sounds, it will have to connect to another MIDI device or computer to make sounds.
You need to check out BIOS settings. It must be there, somewhere it onboard devices.