Industrial frequency, as used in Communications, aka the ISM band, is the frequency of signals between 900Mhz to around 2.4Ghz of encoded, compressed, or analog signals... industrial frequency can also refer to the common local power grid frequency (usually 60 or 50 Hz)
The delta f over f parameter in frequency modulation is significant because it represents the frequency deviation relative to the carrier frequency. It determines the amount by which the frequency of the modulated signal varies from the original carrier frequency. This parameter is crucial in determining the bandwidth and quality of the modulated signal in frequency modulation systems.
Frequency shift keying in digital communication and Frequency modulation in analog communication..........
sat detils
A frequency diagram means of displaying raw data in a graphical form that is easier to interpret. Commonly used frequency diagrams are bar charts, histograms, pie charts, and scatter diagrams.
The human ear is capable of detecting sound at frequencies between about 20 and 20,000 Hz. Within this frequency range, however, the response of the ear is not uniform. The ear is most sensitive to frequencies between 200 and 4000 Hz, and its response decreases toward both higher and lower frequencies. There are wide variations in the frequency response of individuals. Some people cannot hear sounds above 8000 Hz, whereas a few people can hear sounds above 20,000 Hz. Furthermore, the hearing of most people deteriorates with age. The sensation of pitch is related to the frequency of the sound. The pitch increases with frequency. Thus, the frequency of middle C is 256 Hz, and the frequency of the A above is 440 Hz. There is, however, no simple mathematical relationship between pitch and frequency. frequency causes the different types of pitch
because is a industrial standard
A static frequency converter is used to convert one frequency of electrical power into another frequency. It is commonly used in industrial applications where equipment operates on a different frequency than the available power supply, enabling compatibility and efficient operation.
In industrial, there is a device called variable frequency drive (allso frequency inverter, ac drive) to control the motor speed by adjusting output frequency.
A static frequency changer is a device that converts an input electrical power signal of one frequency to an output power signal of a different frequency. It is commonly used in applications where power supply frequency conversion is required, such as in aircraft, marine vessels, and industrial settings. Static frequency changers are known for their efficiency and reliability compared to rotary frequency changers.
Mostly it's industrial because the main purpose is to track item's movement from one location to another. Read more about http://www.rfidtrackingsystem.org
A frequency converter is an electronic device that converts the frequency of an electrical signal. It is commonly used to convert the frequency of power supply in industrial applications, enabling equipment to operate at different speeds or with different power requirements.
Bluetooth technology operates in the unlicensed industrial, scientific and medical (ISM) band at 2.4 to 2.485 GHz, using a spread spectrum, frequency hopping.
It depends on the country as to which voltage is used for industrial purposes. In the US, for welding for example, voltage may be 480 volts. The frequency in the US is 60 Hertz.
Waves with a frequency of 100,000 Hz are classified as ultrasonic waves. These high-frequency waves are beyond the range of human hearing, typically used in medical imaging, cleaning, and industrial testing applications.
One of the objectives of the industrial relations is to avoid industrial conflicts. By avoiding the industrial conflicts the productivity will be raised to higher level and help improve the economic conditions.
Wake frequency refers to the maximum frequency at which a thermowell can be subjected to a flowing fluid before experiencing damage due to vortex shedding. Operating thermowells at frequencies below the wake frequency helps to prevent fatigue failure and prolong their lifespan. It is important to consider wake frequency when designing and selecting thermowells for industrial applications to ensure their proper functioning and longevity.
5.6x10^6 3.00x10^8/5.6x10^6= 5.3x10^-1