0
What else can I help you with?
What information is not included in a Ethernet frame?
Frame Size
What is the maximum and minimum size of a UDP datagram?
maximum size is 512 bytes without header
What is the maximum and minimum size of a TCP header?
maximum 60 octets minimum 20 octets
An Ethernet MAC sublayer receives 1510 bytes of data from LLC layer can data be ccencapsulated in one farme?
maximum data size in the Ethernet is 1500 bytes The data must split between two frames first frame must carry the maximum number of bytes 1500 second frame needs to carry only 10 bytes so: Data size for the first frame: 1500 bytes Data size for the second frame: 46 bytes with padding Answer in Arabic حجم البيانات القصوى في Ethernet القياسي هو 1500 بايت. البيانات من 1510 بايت، لذلك، يجب حدوث تقسيم بين إطارين. المعيار يفرض أن الإطار الأول يجب أن تحمل أقصى عدد ممكن من البايت اي (1500). الإطار الثاني بعد ذلك يحتاج فقط لنقل 10 بايت من البيانات؛ ومع ذلك فهو يتطلب حشوة لتصل إلى 46 بايت. وفيما يلي تفصيل يبين: حجم البيانات لالإطار الأول: 1500 بايت. حجم البيانات لالإطار الثاني: 46 بايت مع الحشو. Muatazz Falih. Basrah.
Minimum size of partition in FAT32?
256mb
Are all Ethernet frame size the same?
No, not all Ethernet frame sizes are the same. The standard Ethernet frame size ranges from a minimum of 64 bytes to a maximum of 1518 bytes for standard Ethernet. However, with the introduction of Jumbo Frames, the maximum size can be increased to 9000 bytes or more, depending on network configurations. Different Ethernet standards and network requirements may dictate specific frame sizes.
What is the maximum number of bytes that is allowed in a standard IEEE 802.3 Ethernet frame?
Totally depends on the hardware and software and their MTU (Maximum Transmission Unit). Usually MTU is set to 1500 bytes.
What is the size of an Ethernet frame carrying an APR packet?
An Ethernet frame typically has a maximum payload size of 1500 bytes, which includes the APR (Address Resolution Protocol) packet. The APR packet itself is relatively small, usually around 28 bytes, allowing the Ethernet frame to accommodate additional headers and trailers, such as the Ethernet header (14 bytes) and the Frame Check Sequence (4 bytes). Therefore, the total size of an Ethernet frame carrying an APR packet would be at least 64 bytes (minimum frame size) up to 1518 bytes (maximum frame size).
What information is not included in a Ethernet frame?
Frame Size
What does a receiving device do if it receives a frame that is less than the allowed minimum size or greater than the allowed maximum size?
the receiving device drops the frame.
What is added when extra filler data is needed in a packet?
In Computer networking, you have data that is transmitted through packets. In which is what we call an Ethernet frame. That Ethernet frame broken up into several pieces. They are:The PreambleRecipient's MACSender MACTypeData (Your information)Pad (FILLER)FCSThe reason why we have the "Pad" is because your standard minimum for an Ethernet frame size is 64 bytes. However, it doesn't all have to be your actual data. For example, if you were to send data that was not 64 bytes. Your NIC (Network Interface Card) will automatically add extra data which is what we can the "Pad" portion. This adds data so that we are back up to the minimum value of 64 bytes within an Ethernet frame.
The largest possible data field in an Ethernet frame is?
The largest possible data field in an Ethernet frame, known as the Maximum Transmission Unit (MTU), is typically 1500 bytes for standard Ethernet frames. This includes the payload or data portion, while the total frame size can reach up to 1518 bytes when including headers and trailers. In some specialized Ethernet variants, such as Jumbo Frames, the MTU can be increased to 9000 bytes or more, but this is not universally supported across all networks.
What is the maximum and minimum size of a UDP datagram?
maximum size is 512 bytes without header
An ip packet to be transmitted by ethernet is 60 bytesif LCC is not in use is padding needed in ethernet and if so how many bytes?
Yes, padding is needed for an Ethernet frame if the IP packet is only 60 bytes and the Length/Type field (LCC) is not in use. Ethernet frames must be at least 64 bytes in total, including the header and trailer. Since the Ethernet header is 14 bytes and the trailer (Frame Check Sequence) is 4 bytes, the total without padding is 78 bytes. Therefore, 0 bytes of padding are needed because the total frame size exceeds the minimum requirement.
Is there a maximum size for readyboost drive?
4GB, minimum size is 256mb.
What is the maximum and minimum size range for pebble?
4
What is the minimum maximum size of ICMP packet?
The minimum size of an ICMP packet is 8 bytes, which includes the 8-byte ICMP header without any additional data. The maximum size of an ICMP packet is 65,535 bytes, which includes the maximum payload that can be carried within an IPv4 packet.
