0
What is the most efficient way to determine if your power supply is bad?
Wiki User
∙ 14y ago
test it with a multimeter
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Are energy efficient computers more or less expensive?
According to the experts this web site is bogo.
Are power supplies interchangeable?
Yes. A power supply is most definitely replaceable. When replacing a power supply, make sure you know how much watts your computer requires to run. Be sure you are not buying too little "wattage" of a PSU.
Which computer component presents the most danger from electrical shock?
The computer component that presents the most risk of electric shock is the power supply. Since there are large capacitors in the power supply, it is possible that you might get shocked, even with the power supply unplugged.Another component that presents a shock risk is an internal modem. You might grab a hold of it while there is an incoming phone call, and then get shocked from the ringer current.
What is the purpose of an F5 load balancer?
The F5 load balancer is designed to avoid overloading servers. It helps defend against attacks and inspects IP addresses to determine the most efficient data centers.
What is the average power consumption of desktop computer?
It depends on what PC, but your power supply will normally say on the side of it. Most commonly is between 200-400 watts Power consumption is a combination of several things. The power listed on your power supply is the amount the power supply is capable of handling. The actual power consumption of the computer depends on what processes are being used, for example word processing will consume less power than heavy gaming. However, one can expect average computer use to consume 150-200W.
Are there any specific brands of power supply that are most effecient?
The ocz 1kw pro xstream is considered the most efficient pwer supply.
Is there an energy efficient way to convert 230 V to 12 V DC?
It depends on the output current. In general, the switching power supply is most efficient.
What is the most efficient way to determine whether your power supply is bad?
There are 2 easy ways to check, but both require some extra equipment. The first, and easiest, is to use a power supply tester. If and when you have one, unplug the power, emove the power supply connector from the mobo, plug that into the tester, and the results should be immediate. Most of the testers have different colored LEDs to indicate the results. The second is to connect a different power supply of the same or greater voltage to your computer, if you have one. If your problem goes away, then it was the PSU, if not, keep troubleshooting. Good luck Bob
Does a solar power generator store enough energy to supply power to an average house?
Some of the solor power generators are larger than others. Most of them will supply power for a few hours or days to an average house. Depending on the size of the solar power generator will determine whether or not it can store enough energy to supply power to an average house. Most likely if you get a very big one it will produce enough energy.
What is the most efficient renewable resource?
solar power
How can you tell if the power of the power supply is on?
Most have a fan in them and you can hear when it is on.
Is controlling the society through force of power the most efficient use of power?
Yes it is!
How efficient is solar power of energy?
It is very inefficient. The best and most expensive systems are only about 10% efficient.
What is the most efficient airflow for a garage heater?
Heat rises so a bottom supply will work best.
Are there any connectors your system needs the power supply doesn't have?
Most often, power supplies for any type of equipment is givin to you when you buy what the power supply is for.
What is the most cost efficient way to produce power is it Nuclear power water power or coal bio fuels?
Nuclear power is the cheapest, safest, and most efficient way to generate power. there are breeder reactors that generate free power by creating fissile material from the normal nuclear waste. so, it does not generate waste
Why do you need to analyse the problem?
If you don't analyse the problem then you cannot determine the most efficient means of solving the problem.
