ENGINE
• Engine Type: 4-stroke, SOHC 2 valves, single cylinder
• Bore and Stroke: 56.0 x 50.6 (mm)
• Displacement: 125 (cc)
• Compression Ratio: 9.8 : 1
• Fuel System: Carburetor, KEIHIN PB18
• Cooling System: Air-cooled
• Lubrication: Forced lubrication (wet sump)
• Starting: Kick and Electric Starter
• Ignation System: DC-CDI
Spark Plug
• Regular: NGK C6HSA
• Optional: ND U20FS-U
DRIVE TRAIN
• Driving System: Chain Drive
• Transmission Type: 4-speed rotary
• Clutch Type[Primary]: Centrifugal and Wet multi disc
SpecificationFRAME
• Frame Type: Backbone, Pipe
Suspension
• Front: 30mm Telescopic fork
• Rear: Swing-arm, Single shock absorber 4 step preload adjustment
Tire Size
• Front: 70/90-17 M/C 44P
• Rear: 80/90-17 M/C 44P
Wheel Size
• Front: 1.4 x 17 Spoke Type
• Rear: 1.6 x 17 Spoke Type
Brakes
• Front: 220 mm Petal Single disc
• Rear: 110 mm Drum
DIMENSION
• Length x Width x Height: 1920 x 645 x 970 (mm)
• Wheelbase: 1245 (mm)
• Ground/Road Clearance: 145 (mm)
• Dry Weight: 96 (kg.)
• Seat Height: 765 (mm)
Curb Mass/Weight
• Front: 46 (kg.)
• Rear: 55 (kg.)
• Fuel Tank Capacity: 5.2 (l)
PERFORMANCE
• Max Power: 8.84Hp @ 8000 rpm
• Max Tourque: 0.90Kgf.m @ 6000 rpm
• Fuel Consumption: 68 Km / Li
Technicians claim that the parts of Kawasaki's fury are made in Japan but the units are assembled in the Philippines.
A 2006 Kawasaki Vulcan 750 is rated at 60 HP.
PnP
A detailed description of what the computer is and what it's good at.
1.wrong specification when delivered.
Technicians claim that the parts of Kawasaki's fury are made in Japan but the units are assembled in the Philippines.
The top speed of a Kawasaki Fury 125 is approximately 155 KPH. Check out this Youtube video for proof: https://www.youtube.com/watch?v=VVC89gUoZAE
0.9liters
according to kawasaki specification page is 4.1 quarts, but that would be with a new oil filter. Chris G.
101.7 kph in a GPS, and 122 kph on analog speedometer
The Kawasaki 110 cylinder head bolt torque specification is 120 pounds. The cylinder head bolts should be torqued in 30 pound intervals.
The Kawasaki Fury 125 has an approximate fuel consumption of around 35-45 km per liter, depending on riding conditions and maintenance. This translates to a fuel consumption of about 2.2 to 2.9 liters per 100 km. For precise figures, it's best to consult the owner's manual or manufacturer specifications, as real-world performance can vary.
To increase speed on a Kawasaki Fury 125, consider using a larger front sprocket or a smaller rear sprocket. This change will reduce the gear ratio, allowing the bike to achieve higher speeds at lower RPMs. However, be mindful that this may reduce acceleration and could affect the bike's overall performance. Always ensure the modifications align with your riding style and safety needs.
If the electric starter of a Kawasaki Fury fails to start, it could be due to several issues, such as a weak or dead battery, a faulty starter relay, or problems with the ignition switch. Additionally, poor connections or corroded terminals could impede electrical flow. It's important to check these components systematically to diagnose the exact cause of the failure. If these elements are functioning properly, the issue may lie within the starter motor itself.
Masahiro Kawasaki's birth name is Masafumi Kawasaki.
kawasaki rouser 220
The owners manual for the KZ650 1977- 1983 reads as follows "- Spark plug Type .......... NGK B7ES, ND W22ES-U Gap ........... 0.028-0.031 in (0.7-0.8 mm)"