cat 5
The connector used to terminate Ethernet cables is called an RJ-45 connector. They are the clear plastic connectors you see at either end of an Ethernet cable.
RJ45 is the standard 8P8C telecommunications connector commonly found in computer networks such as Ethernet. RJ45 specifies both the plug and the socket. Connections are typically formed using twisted pair cabling, predominantly Category 5 (CAT5). Ethernet cables may be configured as patch cables or as crossover cables. These two configurations are standardised in TIA/EIA-568 and ISO/IEC 11801. Patch cables are used to connect two different devices, such as when connecting a computer to a network switch or hub. Patch cables use the T568B scheme to terminate both endpoints. T568B is also used to terminate socket-to-socket endpoints and adaptors. Crossover cables are used to connect devices of the same type, such as when connecting one computer directly to another, and use the T568A scheme on one end and T568B on the other.
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
RJ45 is a 8 pin connector used on networking(ethernet) cables RJ11 is 6 pin connector used on telephone cables in the USA
Well usb has charging capabilitys for cell phones, ipods, ect and is usually not used as an internet cable. Also most computers have a few USB ports. Now ethernet connection is used for connecting your computer to let say your router/modem to use internet. It is not used for much else at all. Hope this helped
cat 5
RJ-45
The connector used to terminate Ethernet cables is called an RJ-45 connector. They are the clear plastic connectors you see at either end of an Ethernet cable.
Ethernet.
your mother is fat
Bulgin is a type and manufacturer of connector plugs. It is used on non-standard connection types such as the small, three pin connector plugs. It is for uncommon connections.
When there is no wireless connection an ethernet splitter is what is used so that there is internet available.
It is on the end of Cat 6 (ethernet) cables.
RJ45 is name of connector types used for Ethernet connections on computers and other Ethernet networking devices like routers and switches and also modems and other devices which support Ethernet interface. - Neeraj Sharma RJ45 is the standard for the plug that you use for connecting cat5 cable to a network. It's an 8 connector plug that looks like a larger version of a phone plug.
Cat.5
1) connect the ip phone to the ethernet LAN using an rj45 connector 2) establish an internet connection then use an analog telephone adapter.
BNC