Token
Data transmissions is via frames, each having a single MAC address. The CSMA/CD access method is used to detect collisions.
Initiate data exchanges May upload data to serves
The telephone call has been transmitted over data networks/internet.
Polling in satellite networks is electronic signally between satellites to see which one is going to send data. It also requires a receiver that is polled to see if it is ready to transmit data.
Router or bridge.
bus
Data collisions occur when data is transmitted on the same medium at the same time. Therefore, to avoid data collisions, connect all hosts to a full duplex switch.
Polling, on computer networks, involves a server and client. The Server will check if the client is ready to receive data. If not ,then data will not be transferred to the client.
In a network, collisions occur when two or more devices transmit data at the same time on the network, resulting in a data packet being corrupted. When a collision occurs, the devices involved must wait for a random amount of time before retransmitting their data to avoid another collision, which can impact network performance and throughput. Modern networks use techniques like collision detection and avoidance to minimize the occurrence of collisions.
Switches avoid collisions on a network by using a method called store-and-forward switching. They receive incoming frames, buffer them, and check for errors before forwarding them to the appropriate destination port. This process allows switches to manage data traffic efficiently, ensuring that only one device can transmit to a specific port at a time, thereby preventing collisions. Additionally, switches create separate collision domains for each connected device, further reducing the likelihood of collisions occurring.
Data transmissions is via frames, each having a single MAC address. The CSMA/CD access method is used to detect collisions.
EDI stands for Electronic Data Interchange which is the predecessor to electronic ecommerce and is a method for transferring data between computer systems or computer networks.
Data transmissions is via frames, each having a single MAC address. The CSMA/CD access method is used to detect collisions.
are talking about when you are networking ?this is to avoid an intend message which is distinct to a particular address from beenreceive by a wrong address
Ring networks are commonly used in local area networks (LANs) and in certain telecommunications applications. They facilitate efficient data transfer by allowing packets to travel in one direction around the ring, minimizing collisions. Additionally, ring topologies are often employed in environments where consistent data transmission is critical, such as in some industrial settings and in token ring networks. However, their use has diminished in favor of more robust and scalable network topologies like star and mesh.
The CSMA/CD access method is used to detect collisions Data transmission is via frames, each having a single MAC address
What are two characteristics of clients in data networks?Initiate data exchanges. May upload data to servers