AppleTalk
ARP
DNS
Transmission Control Protocol (TCP) establishes a connection with the remote host before sending data.
Dynamic Host Configuration Protocol (DHCP) A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network. The system administrator assigns a range of IP addresses to DHCP and each client computer on the LAN has its TCP/IP software configured to request an IP address from the DHCP server. The request and grant process uses a lease concept with a controllable time period.
There are three basic hardware building blocks of a host. These include the Transmission Control Protocol (TCP), client technology, as well as Packet Switching.
The protocol that automatically configures IP settings for a client is called Dynamic Host Configuration Protocol (DHCP). DHCP allows devices on a network to receive IP addresses and other network configuration parameters automatically, eliminating the need for manual configuration. When a client connects to the network, it sends a request to the DHCP server, which then assigns an available IP address and provides additional information like the subnet mask, default gateway, and DNS servers.
Dynamic Host Controller Protocol, Which controlls the host in the form of protocol.
There are two ways to configure Ip address . One method is to do this manually .And other is to do this using dynamic host configuration protocol.
Yes.
2u.pw/6q1h4File Transfer Protocol
Dynamic Host configuration Protocol different IP address every time it connect to the network (How to work DHCP server):- It Provide IP address in any system in the follwing four step :- 1) Dynamic Host Configuration protocol Lease Request. 2) Dynamic Host Configuration Protocol Lease Offer. 3) Dynamic Host Configuration Protocol Lease Selection. 4) Dynamic Host Configuration Protocol Lease knowlegment. 1) Dynamic Host Configuration Protocol Lease Request :- At first client prepare a packet and broadcast from searching the Dynamic host configuraiton protocol server. 2) Dynamic Host Configuration Protocol Lese Offer : Now the Dynamic host configuration protocol server select the internet protocol address from the scope the give the offer to the clients ,if more than one dhcp server if present in network than the dhcp server in which offer come enough first basic provide ip address. APIPA(Automatic Private ip Addressing ) : In case DHCP server not ip addressing provide so this situation by APIPA ip address provide from clients side It range the IP address 169.254.0.1 to 169.255.254 in this case the client which broadcast massanger at first time will take specific IP from APIPA after this it always contect every five minutes to any Dynamic host configuration protocol server. 3) Dyniamic Host Configuration Protocol : When client take the offer then the Dynamic host configuration protocol server send the selected IP address from the client. 4) Dynamic Host Configuration Protocol : After giving the IP address given the server send massage Dynamic host configuration protocol client.
DHCP Server (Dynamic Host Configuration Protocol)
telnet
Dynamic Host Configuration Protocol
ARP
It stands for Host.
Ethernet