0
What side of a 190 dege thermostat goes in the engine block on a 1991 ford explorerplease answer?
Wiki User
∙ 15y ago
In most if not all thermostats you place the "pill" side in the block. this allows for the pill to compress the spring when it heats up opening the valve to allow water to flow through the rest of the cooling system.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Who is Charles babbege?
He invented the Difference Machine and the Analytical Engine. The Difference Machine was started in 1821 but failed its test in 1833. In 1842 Charles Babbage created the Analytical Engine; he completely abandoned the Difference Machine. It was never completed but it helped improve Britain's machine-tool industry. In 1991, the National Museum of Science and Technology built a replica of the Difference Machine; it was a real working one. In 1879, Charles Babbage's son reassembled a section of the Difference Machine, which was auctioned for auction in London auctioned in Sydney for $282,000.
How long has WiFi been around?
It was invented in 1991 by the NCR Corporation/AT&T
The internet was used primarily for academic and military purposes until this was introduced in 1991?
Personal Computer!
When was the website made?
the first website showed up online on August 6 1991
What is the age of rajat tokas?
His age can be well decided using his date of birth which is fully confirmed trusting his words; 1991, 19th july....
Where is the thermostat on a 1991 4-runner?
The thermostat on a 1991 Toyota 4Runner is located on the engine block. It can be found by following the large hose coming from the radiator.
Where is the coolant temperator sensor 1991 berretta?
On the engine block, near the thermostat housing.
How do you find the thermostat on 1991 Acura RS?
How to change thermostat: Drain coolant by removing drain plug on radiator. Locate lower radiator hose and follow it to engine block. Pull the hose from engine block to expose the fitting/thermostat cover. This fitting is held on with two 10mm bolts. Remove to expose thermostat.
Where is the theromastate 1991 Nissan 300 zx?
The *thermostat* is behind the timing cover where the radiator hose goes to the engine block in the front-center of the engine
Where is the thermostat on a 1991 Dodge shadow located?
You can find the 1991 Dodge Shadow thermostat in the thermostat housing. The thermostat housing will be on the front of the engine.
Where is the thermostat located on a 1991 park avenue?
Follow the big hose from the top of the radiator to the engine block. You should find a removable housing that contains the thermostat. After you remove this, remember which way the thermostat is installed so you replace it correctly.
Where is the thermostat located on a 1991 Buick Skylark?
The thermostat on a 1991 Buick Skylark is located near the engine. To find the thermostat, follow the top radiator hose directly to the thermostat.
Where is the location of the thermostat on a 1991 Nissan 300zx non turbo?
Follow the top water house connection from the radiator towards the engine. When that hose seems to connect to the engine block, there will also be the thermostat. One has to remove the water hose of course to see it or replace it.
Where do you find the thermostat on a 1991 Nissan Sentra 1.6 DOHC?
For the 1988 1.6 and for most cars, follow the top radiator hose from the radiator to the engine block. Remove the hose from the engine block then remove the flange the hose was connected to (usually 2 bolts but may be 3 bolts on the Nissan). The thermostat is behind the flange.
Which way does thermostat go in 1991 dodge spirit?
The spring goes into the block.
Where is the thermostat located on a 1991 Mazda 626?
Follow the bottom hose comming from your radiator to where it connects to the engine block, u will see the housing that normally looks like it sits on top of the block, the thermostat is located inside this housing. its inside the bottom hose of the radiator, not the top.
How hard is it to change a 1991 ford escort lx thermostat?
locate the upper radiator hose. follow it from the top right side of the radiator to the engine block. remove the hose from that block , then remove three screws so that little block can be removed where you'll find the thermostat inside. clean the old gasket off both sides of the thermostat housing, replace the thermostat and gasket... dont forget to use a sealant around the edges of the block and the thermostat housing before securing
