A suspension bridge suspends its load from main cables that run along both sides of the structure. The beam bridge is the oldest and most common type of bridge. A beam bridge is a horizontal structure, with beam supports at each end, and piers between the beams.
North Bridge and South Bridge. The North Bridge is the faster end of the hub containing the graphics and memory controller and connects to the system bus. The South Bridge is the slower end of the hub and contains the I/O controller hub. All I/O devices with the exception of display and memory are connected by the slower South Bridge.
Millau bridge is located in the South of France. The reason to build the Millau bridge was to accommodate the huge traffic.
bridge...
In STP, first a central switch (or bridge, as it it called in STP) is selected - the "root bridge". All other switches calculate the shortest path to this root bridge.
Because new technology lightens up the work. It does not need more people thus the organizational structure will be affected.
if you build an arch bridge it can hold more weight then anyother type of toothpick bridge and can hold about 20lbs (if made well) another good type of bridge is the truss bridge it is just as strong as the arch bridge but it has diffrent structures.
The Golden Gate Bridge can hold up to 38,000 tons of weight.
It is a pre-stressed concrete box girder bridge.
an arch bridge weakness is not having enough streanth to hold up the middle
an arch bridge weakness is not having enough streanth to hold up the middle
it is made up of beams to hold it
to hold the strings in place and up
To allow large gaps to be bridged without needing support pillars to hold the bridge up.
bridge hold is when we use the pallete knifes to cut the fruits out.
load bearing
The harbour bridge was built on Saturday 19th March 1932. The pylon is used to hold the bridge from both ends. Then the arc was made and used cranes to hold them up in place. The there was the road being made and then the cconcrete.
logos