0
What else can I help you with?
What will you need to configure a snort network IDS sensor to monitor subnetwork using a web-based console interface to manage the IDS system?
You need the alert monitor to configure and store the alert data which is recorded by the snort sensor.
Can you have two internet connections on one computer?
HOW TO: Set Up Multiple-Device (Multilink) Dialing in Windows XPThis article describes how to configure multiple-device dialing in Windows XP....loadTOCNode(1, 'summary'); This article describes how to configure multiple-device dialing in Windows XP.With Windows XP, you can use multiple modems to connect to your Internet service provider (ISP) to increase the total speed of your transfers. Multiple-device dialing (also known as Multilink PPP, modem aggregation, or Multilink) causes multiple physical links to be combined into one logical link. Typically, two or more ISDN lines or modem links are bundled together for greater bandwidth. You might use this feature if you do not have access to DSL or cable services.Multilink is enabled automatically in Windows XP Home Edition and Windows XP Professional.RequirementsloadTOCNode(2, 'summary'); To use multiple device dialing: Your ISP must support synchronization of multiple modems.You need to install multiple modems.You need a separate phone line for each modem.Note that a single ISDN adapter can act as multiple devices because ISDN includes two 64-Kbps B channels, which can be used independently or together.Configuring Multiple-Device DialingloadTOCNode(2, 'summary'); The Network Connections feature performs Point-to-Point (PPP) Multilink dialing over multiple ISDN, X.25, or modem lines. This feature combines multiple physical links into a logical bundle; the resulting aggregate link increases your connection bandwidth. To dial multiple devices, both your connection and your remote access server must have Multilink enabled.Network Connections can dynamically control the use of lines that are using Multilink. By allocating lines only as they are required, excess bandwidth is eliminated. You can configure the conditions under which extra lines are dialed, and underused lines are hung up, by changing Network Connections settings.Note that if you use Multilink to dial a server that requires callback, only one of your Multilink devices is called back. This occurs because you can store only one number in a user account. Therefore, only one device connects and all other devices do not connect; your connection loses Multilink functionality. You can avoid this problem: If the phonebook entry for the Multilink connection uses a standard modem configuration, and the remote access server that your connection is calling uses more than one line for the same number.If the phonebook entry for the Multilink connection is ISDN with two channels that have the same phone number.To configure a connection: Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.Click the connection that you want to configure (for example, a dial-up connection), and then, under Network Tasks, click Change settings of this connection.Click the General tab, and then click each device that you want to use for this connection.Use one or more of the following steps: To configure dialing devices, phone numbers, the host address, country or region codes, or dialing rules, click the Generaltab.To configure dialing and redialing options, or X.25 parameters, click the Options tab.To configure identity authentication, data encryption, or terminal window and scripting options, click the Securitytab.To configure the remote access server and protocols that are used for this connection, click the Networking tab. Also, click Settings and select the Negotiate multi-link for single link connections check box.To enable or disable Internet Connection Sharing, Internet Connection Firewall, and on-demand dialing, click the Advanced tab.Notes: Depending on the type of connection that you are configuring, different options and tabs appear in the connection's properties.For more information about a specific item on a tab, right-click the item, and then click What's This?APPLIES TOMicrosoft Windows XP Home EditionMicrosoft Windows XP Professional
Can I get a internet connection anywhere in the world with a IP address?
Wherever you can get an internet connection, you will need to have or be assigned an IP address. However ALL locations in the world do not necessarily have and internet connection available.
How do you upgrade IPv4 to IPv6?
You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.
What is an SQL server connecton string?
An SQL server connection string contains information that providers need to know in order to establish a connection to a database. There are many ways to write a connection string because each provider has multiple ways to make a connection.
How do you get in internet?
You need to get a connection which is going to connect you to the internet with a modem and then configure your computer accordingly.There are many Internet Service Providers like Airtel and others.
What do you need for home wireless connection?
For a wireless home connection, you will need a few items. You will need an internet connection and modem. You will also need a router, which is hooked up to the modem. The router broadcasts a wireless signal which you can connect to with your wireless devices.
How do you change computer but maintain the same Internet connection - as in getting a new computer?
Most computer will automatically read the incoming connection and connect to it, usually no need to configure any advanced settings, that unless your using Ubuntu, which then you will need to put in the networks name.
How do you configure a network in Linux?
What version of Linux do you want to configure the network on? there are thousands of distro's... and I need to know the following in order to answer your question: 1. Linux version 2. Network Card type 3. What kind of network connection are you trying to make?
What kind of skills do you personally need to run a successful business?
you need to have money, teamwork, and a place to sell you items.
What items do you need to play on xbox live?
a xbox a controller a tv a internet connection a brain
How do you configure a ps3 with a at and t 2wire so that the internet wont slow down at and t said that i need to configure since it is a third party item but they charge to much please help?
The only connection you can make with wires to the PS3 for internet is to plug in an ethernet cable
Can you install 2 network cards in your PC one for the broadband connection and one for the 2nd PC connection data sharingprinting?
Yes, it is not the simplest or most efficent, but it will work. You will need to configure your PC as a router for any other device to have internet access.
Do you need a wireless connection adapter to connect to Xbox live?
There are two ways to connect to Xbox live... 1) Plug a connection cord into the back of your 360 (Under the USB Port) and plug second end into Modem/Router. 2) Try and connect to XBL, If it fails then go to "Test Connection" Second way is to, 1) Buy a wireless connection adaptor for the 360 2) Plug it into the USB port on the 360 3) If #2 fails then Go to Test Connection and go to Configure Connection (or something similar) 4) Once in Configure then select your Modem/Router Name. 5) Test Connection again.
Does a router need a computer?
only to configure it, after that, no.
How do you configure udp?
You don't need to configure UDP; this is done automatically by the application protocols that use this transport method.
How do you put internet on your dsi with a wireless rouder?
First, you need to buy a Wireless Router.Next, go to the System Settings in your Dsi.Next, slide on over to the Internet bar.After that, go to the Connection Settings.Finally, get an adult to help you configure your settings.
