0
What else can I help you with?
Which type of cabling should you use for Gigabit Ethernet?
Cat-6
Which type of cabled medium is used by 100Base-TF?
The type of cabling you would use for 100BaseT is Cat5E.
What all ethernet networks independent of their speed or frame type and use an access called?
csma
Which type of cabling is easiest to install?
In computer networking, the type of cabling that is easiest to install is coaxial cable. It is a light, inexpensive and flexible cable.
Give the correct cable type for 100BasedT network?
10BASE-T can use CAT3 cabling or better, while 100BASE-T requires CAT5 or better (such as CAT5e or CAT6).
Gigabit Ethernet what type of cabling?
There are different types of gibabit Ethernet; the cabling can either be some kind of copper cable, usually UTP, or fiber optic.
Stp cable connecter used in lan?
Shielded Twisted Pair (STP) is twisted pair cabling includes a shield.This type of cabling is not commonly seen in modern LAN networks deployments till 2011 however some newer very high speed Ethernet technologies may require a cable that has a shield.
Which type of cabling is best for networking?
Ethernet networking typically uses category 5 or category 6 cabling.
Which type of cabling should you use for Gigabit Ethernet?
Cat-6
What is the most common Ethernet frame type used on modern networks?
Ethernet_II Network + Guide to Networks (version 5) pg. 217
Which type of cabled medium is used by 100Base-TF?
The type of cabling you would use for 100BaseT is Cat5E.
Which cable type is a common choice for use on ethernet networks?
CAT5 or CAT6
What type of connector does a NIC use?
The most common ethernet connector on category 5 and 6 cabling is called RJ-45.
What all ethernet networks independent of their speed or frame type and use an access called?
csma
What is the main function of straight over network cabling?
The main function of straight-through network cabling is to connect different types of devices on a network, such as computers to switches or routers. This type of cabling ensures that the transmission and receiving wires are aligned correctly, allowing for the proper communication protocol to be followed. Straight-through cables are typically used in Ethernet networks, adhering to standards like T568A or T568B for consistent wiring. This facilitates reliable data transfer and networking performance.
What general type of cabling is a tech most likely to use today when installing Ethernet cabling in areas with high electrical interference?
When installing Ethernet cabling in areas with high electrical interference, a tech is most likely to use shielded twisted pair (STP) cabling. STP includes shielding that protects the data signals from electromagnetic interference (EMI), ensuring better performance and reliability. Additionally, using Category 6 (Cat 6) or higher cabling can enhance resistance to interference while supporting higher data rates.
What type og cabling is used for cable modems?
Coxial cable is used from the wall to the modem. From the modem to the computer an RJ-45, or ethernet, cable is used.
