between an ISP and a home-based LAN
A jumper wire termination type used in electronics testing. Normal used in a Break Out Box (BOB) to connect a test point to another point connection. It is a alligator clip on one side and a test point bayonet on the other.
Satellite
An isochronous connection is a path between two devices over a predetermined list of wireless channels. Bluetooth uses this type of connection to deter the amount of interference received as well as created. The basic idea of this connection type is that two devices will cycle between channels a-f, and repeat.
catv
Description of the RTP connection
The point of connect between a client and a host.
point-to-point
Point of Presence -or- Point of Purchase It depends on the type of business. Both are usually used interchangeably though.
there are two types of connection network: Point-to-Point Connection and Multipoint Connection
war chalking
This statement does not make logical sense. The presence of a certain type of berry does not necessarily indicate the presence of a hatchet or any connection between them. Each item exists independently of the other.
Point to point connection
This can vary depending on your type of service, but generally your modem (usually supplied by your ISP) would act as the connection between your ISP and your LAN.
It is Point-to-Point connection because multipoint connection needs more than two end points.
A person can find a neutral connection point is testing the continuity of every neutral connection. This technique will enable a person to find a bad connection point.
A Router/Modem
The term, 'star point', refers to the common point of connection for the three windings of a star-connected (wye-connected) transformer connection. The star point is usually earthed (grounded) and provides the neutral point of the connection.