0
RJ-45 or 8P8C modular connectors
Wiki User
∙ 13y ago
Anonymous
bnc
Add your answer:
Earn +20 pts
When all users on a network require the same access to all resources what type of network model should you use?
Homegroup
Which type of cabled medium is used by 100Base-TF?
The type of cabling you would use for 100BaseT is Cat5E.
Identify the connector that can be used to connect RG6 cables?
The "F" connector is the most common type that is used on RG6 cable. This is the universal connector for home use of RG6 with antennas, CATV, satellite, and consumer electronics.
Analog modem use which type of connector?
The type of connector is used by the analog modems is RJ11 or RJ45.
What type of a port is a female DB25 connector?
Parallel
What is the most common type connector used with coaxial cable on a ThinNet internet network?
BNC Connector
Which connector is the most common type of connector used for devices that require 5 V or 12 V of power?
db9
Which type of connector does a network interface card use?
If you mean a standard 10/100 type Network Interface Card (nic), then you connect it with a CAT5 or CAT6 cable, the connector on the end is known as an RJ45.
What is the most common type connector used with coaxial cable on a ThinNet Ethernet network?
BNC
What type of network topology typically requires that the host connect through a T-connector?
bus
What type of network topology typically requires that the host connect through a t connector?
bus
What type of cabling is typically used for 100BaseT?
Shielded Twisted Pair (STP)
What is the most common type connector used with coaxial cable on at ThinNet Ethernet network?
BNC connecter
When all users on a network require the same access to all resources what type of network model should you use?
Homegroup
You are implementing an Ethernet network using CAT 5 cabling What connector should you use with this type of media?
UTP or STP Cat 5 cable uses an RJ-45 connector.
Which type of cabled medium is used by 100Base-TF?
The type of cabling you would use for 100BaseT is Cat5E.
From the network specification you learn that a network will be using the 1000BaseCX standard What type of cable will it be using?
You need to use copper twisted-pairs called twinmax, it uses a special 9-pin connector known as HSSDC.
