1. Check that all cables are firmly attached to the right devices
2. Check that all expansion cards are properly seated
3. Check that no screws, brackets or other metallic pieces have been left in the case where they could cause a short.
Startup BIOS first checks all the essential hardware components to make sure they're working and displays its progress on-screen.
bios
Typically, it will be Spell check in MS Word, Notebook, Excel, Power Point Etc.
For every memory access operation, the page table needs to be consulted to check whether the corresponding page is resident or not and whether the program has read or write privileges for accessing the page. These checks would have to be performed in hardware. A TLB could serve as a cache and improve the performance of the lookup operation.
When the computer is first turned on, (or booted), the BIOS program is in control. After performing a few system checks, the BIOS program turns the computer over to an operating system like Windows XP.
POST stands for Power On Self Test. Basically, the computer checks itself for hardware and software problems. If it doesn't detect anything, it boots. If it does, it won't boot. This is useful because before boot is the only time the computer remains in the BIOS, so it is a way the computer checks the BIOS without the user having to do anything.
POST stands for power on self test it does basic hardware checks on the computer
NTDETECT - is answer.
database
... it starts up. Well, to get a little technical about it, the BIOS of the computer checks all the hardware (mounting and error checking) and gets everything ready, then boots the operating system (Windows/Linux/Mac).
POST Stands for Power On Self Test.This happens when you switch on your computer and system checks whether all hardware components are attached properly or not.
The Firewall is software or hardware that checks information coming from the internet or a network, and then either blocks it or allows it to pass through to your computer, depending on your firewall settings.
The Firewall is software or hardware that checks information coming from the Internet or a network, and then either blocks it or allows it to pass through to your computer, depending on your firewall settings.
If the computer information says that it is a Pentium II then that is correct as the computer always checks the hardware before giving the results. Also the Centrino Duo And Celeron are both based on PII, PIII and P4
Startup BIOS first checks all the essential hardware components to make sure they're working and displays its progress on-screen.
If I understand your question correctly then the answer is the BIOS (Basic Input Output System). It checks that all of the hardware in your computer is functioning correctly and the settings for said hardware (example: the boot order - whether to boot from the HDD or a disk in the disk drive).
When a computer boots it goes through a POST (Power on Self Test). It checks to see if the CPU, the RAM, and the motherboard are functioning correctly. If it passes the POST it goes to BIOS.