enok
If the peripheral component draws power from the PC then that could relate to a problem on the PC. If it draws power from the same extension and the things in that extension are drawing too much power for the extension then that could also affect the PC.
The bootstrap program should automatically load the operating system after a power outage or reset. The operating system would then load the remaining software.
Laptops do not generally have a reset button. However pressing and holding the power button usually forces the system to power off, and then pressing it again would start it back up thereby restarting the system.
A waterfall model would be a good approach for that type of project.
Same as it would be in any other operating system: vi is a text editor, mostly tailored to power users.
The power consumption of a lightbulb would be in watts.
This would depend on the actual frame purchased as the power and energy consumption would differ between different brands and companies. If a frame has an automatic hibernation feature that hibernates when no one is near then it would be using less power compared to a frame that stayed on all the time. However if it is a frame that is on all the time with no sleep or hibernation then yes you would have to worry about the power consumption as it would be high compared to your other appliances.
until it passes through your system..but traces of the hash will probably still be affecting your body if taken in a large consumption. until it passes through your system..but traces of the hash will probably still be affecting your body if taken in a large consumption.
It would depend on the power consumption of the device in use.
you would want to decrease the power consumption of an integrated circuit to reduce power needed and at the same time reduce power dissipation meaning it will run cooler if overall power is reduced. With some families of logic circuits the voltage must be maintained at 5 volts for proper applications. The voltage applied determines the power that can be used effectively.
No. No military force can approach democracy. Such a system would be untenable.
No, electric companies cannot report a spike in the bill to the police. Billing issues are typically resolved between the company and the customer directly. If there are suspicions of electricity theft or illegal activity, the company may involve law enforcement, but only if necessary.
Power = Voltage * Current Current = Power/Voltage, = 2,750,000/110,000 = 25 amps.
No. Any difference in power consumption would be negligible... unless you're using an ultra high power amp system with 50 sub-woofers and a few hindered mid-range and you are trying to fill a theater.
The instantaneous power consumption will be the same at any temperature, but the overall power consumption will be greater at higher temperatures, since the unit will run more often. This is a consumer answer, not a scientific answer. Scientifically, you would have to consider the coolant pressures and wire resistance at each temperature. Your electric bill will not see these differences.
Current.
not at all. First, no energy is created (that only happens in nuclear reactions), but that also does not happen in fossil power plants. Apart from that, we already use a large proportion of the solar power output to produce food. If we were to replace our current power consumption with solar power consumption then we would not have enough land anymore to grow food.