The Destination Address (Layer 2 or Layer 3)
destination IP address
way
the network portion of the destination ip address
It uses the MAC address, Media Access Control. Every packet sent from a computer contains its MAC address. The router stores this in its routing table. When it receives a packet with a destiation address of that MAC address, then it forwards it to that computer. This is called NAT, Network Address Translation. It uses the Destination IP address
--> If the destination network is directly connected, the router forwards the packet to the destination host. --> If no route exists for the destination network and a default route is present, the packet is forwarded to the next-hop router. --> If the originating host has a default gateway configured, the packet for a remote network can be forwarded using that route.
packet-filtering
in general the router uses the network address to compare to the routing table. Specifically, on the internet, the Router looks up the destination IP address in the router table to determine where to route the packet.
First, routing is the process a router performs when making forwarding decisions for each packet arriving at the gateway interface. To forward a packet to a destination network, the router requires a route to that network. If a route to a destination network does not exist on the router, the packet will be forwarded to the default gateway. Now, the destination network can be a number of routers or hops away from the default gateway. If the router has an entry for the network in its routing table, it would only indicate the next-hop router to which the packet is to be forwarded to and not the exact route to the final router. To sum it up, the routing process uses a routing table to map the destination address to the next hop and then forwards the packet to the next-hop address.
the network portion of the destination ip address
First, routing is the process a router performs when making forwarding decisions for each packet arriving at the gateway interface. To forward a packet to a destination network, the router requires a route to that network. If a route to a destination network does not exist on the router, the packet will be forwarded to the default gateway. Now, the destination network can be a number of routers or hops away from the default gateway. If the router has an entry for the network in its routing table, it would only indicate the next-hop router to which the packet is to be forwarded to and not the exact route to the final router. To sum it up, the routing process uses a routing table to map the destination address to the next hop and then forwards the packet to the next-hop address.
the router will enqueue the packet that is sent to the destination 192.168.1.4.and then that packet is sent on transmission media(cable).it checks every ip address that is holding the ip same as the destination ,if it reaches there then it deleiver it on that machine.
It uses the MAC address, Media Access Control. Every packet sent from a computer contains its MAC address. The router stores this in its routing table. When it receives a packet with a destiation address of that MAC address, then it forwards it to that computer. This is called NAT, Network Address Translation. It uses the Destination IP address
The router discards the packet. The router forwards the packet via the default route
It will forward the packet to the default gateway.
--> If the destination network is directly connected, the router forwards the packet to the destination host. --> If no route exists for the destination network and a default route is present, the packet is forwarded to the next-hop router. --> If the originating host has a default gateway configured, the packet for a remote network can be forwarded using that route.
Answering "If a router recieves a packet that is does not know how to foward what type of route must be configured on the router to prevent the router from dropping it?"
packet-filtering
buffer
Route table lookup