0
SCSI 3
What else can I help you with?
What are SCSI types that allow for 16 devices including the adapter to be connected on a single shared cable?
Ultra wide SCSI. wide SCSI buses support 16 devices, rather than the eight devices specified in regular SCSI.
To reduce the amount of electrical noise or interference on a scsi cable each end of the scsi chain has a?
terminanting resistor
What is SCIS?
SCSI is a type of interface used for computer components such as hard drives, optical drives, scanners and tape drives. It is a competing technology to standard IDE (Integrated Drive Electronics). While the less expensive IDE technology is built into motherboards, SCSI is a technology that must be added by purchasing a SCSI controller. The SCSI card fits into an internal PCI slot. SCSI devices are then connected to this card.
Uses for computer wire awm e101344 style 20276 space shuttle-c?
Its a SCSI cable with a 50pin HD SCSI 2 connector on one side and a 68pin SCSI 3 connector on the other.
What might happen if a SCSI bus is not properly terminated?
Performance may suffer; the initiator (SCSI controller) may not see the SCSI targets (i.e, disks) ... or they may disappear at some really bad time; or performance might be great but you will get a lot of errors and data corruption ; The correct answer depends on a lot of variables including cable length; whether or not the controller and/or any of the disks are terminated; type of SCSI you use; quality of SCSI cabling; and SCSI device physical topology. Your computer may not even boot or spin up the whatever is connected to the SCSI controller. Bottom line, SCSI absolutely must be terminated properly. If it isn't, bad things may happen at unpredictable times.
Which version of scsi is known as fast scsi?
SCSI-2
What is the full form of SCAM?
SCSI configured auto-magically.......
What is SCAM and how does it make device installation easier?
SCAM is SCSI configuration automatically and is a method by which SCSI devices and the host adapter can be plug and play compliant. (p.1005 managing and maintaining your PC fifth edition)
Which SCSI standard allows for the technique known as hot swapping?
The SCSI standard that allows for hot swapping is SCSI-2. This standard introduced the ability to add or remove SCSI devices while the system is powered on and running, enhancing flexibility and reducing downtime. Hot swapping is particularly useful in environments where continuous operation is critical, such as servers and storage systems.
How do you set SCSI device IDs if your host adapter is not scam compliant?
Using jumpers or rotary dials (or another type of switch) on the device itself
Which two SCSI connectors might be used with narrow SCSI?
DB25 SCSI connector50 pin SCSI connector
Which SCSI is known as fast SCSI and has a 68 pin connector?
SCSI 3
SCSI bus can support up to how many devices simultaneously?
SCSI, Fast SCSI, Ultra SCSI, Ultra2 SCSI: 8 devices Wide SCSI, Fast Wide SCSI, Ultra Wide SCSI, Wide Ultra2 SCSI, Ultra3 SCSI, Ultra160 and 160+ and Ultra320 : 16 devices Of course, the number of devices supported depends not only on protocol limitations, but cable length, number of cables used, etc.
Which is the latest SCSI standard?
Serial attached SCSI
What are SCSI types that allow for 16 devices including the adapter to be connected on a single shared cable?
Ultra wide SCSI. wide SCSI buses support 16 devices, rather than the eight devices specified in regular SCSI.
Which scsi standard introuced spi?
scsi-3
When was SCSI Duck created?
SCSI Duck was created in 2003.
