If JVC TV has no picture but only sound, there may be a problem on the signal board. Contact an authorized service center to arrange for estimate of repair.
Check to see if any of the cords are not plugged in correctly!
Sound and picture are transmitted on separate cables for Cable TV providers.
The colors and the picture need to come into focus where as the sound is already in clear pitch.
The short answer is you can't; if the TV only has a mono receiver the stereo information isn't available. However, most modern TVs have digital receivers or NICAM decoders, if you're TV is one of these types, then there may well be phono's on the back of the set for sound out or a headphone socket - these can be connected to a domestic hi-fi to improve the sound and should be in stereo.
Well, you are talking about two separate sound outputs. The audio built into the PC and the audio system that is built into the HDMI system. If you don't use the audio from your pc...the sound is heard from your hdmi device...in this case the TV. Most TVs don't have a spot to simply attach a subwoofer and you have to once again send the output (from the TV) to an external amp...where you can attach external speakers and a subwoofer. Or...you can simple use the PC audio to plug into a speaker system with a subwoofer. Your TV becomes strictly a MONTIOR.
For example: connect to a Sony Bravia LCD TV set 1. Connect between TV's PC IN (RGB port) and dv5000's external monitor port. wire should be come with your TV set. 2. Connect between TV's PC IN (Audio port ) and dv5000's ear phone. 3. Turn TV to Video to Video 8 4. Click dv5000 fn & f4 at same time twice 5. Now you can do you business and both monitors of TV and dv5000 have same picture or text.
hitachi tv has sound no picture
Picture is AM, sound is AM or FM
Sound and picture are transmitted on separate cables for Cable TV providers.
If you have hooked up your DVD player and get sound but no picture, try changing the picture source from TV to AV 1.
sound waves don't have enough room
LM is video (picture)CM is auto (sound)
The colors and the picture need to come into focus where as the sound is already in clear pitch.
Try changing the source on the television to AV1 if you only have sound but no picture from a DVD player. If it is on TV it will not play a DVD.
Mine doesn't!!
Why is the light on power no picture tv
The IN cable in the back is loose or detached.
Could be the tuner board or input settings.