This question is so unspecific. You should state what you want to know about 1 cubic mm of mild steel.
The weight of an 8 mm mild steel plate would depend on the dimensions of the plate. However, as a rough estimate, the weight of a 8 mm thick mild steel plate measuring 1 square meter would be approximately 62.8 kg.
The weight of steel per cubic millimeter can vary depending on the specific type of steel being used. On average, the density of steel is around 7.85 grams per cubic centimeter. To convert this to cubic millimeters, you would need to divide by 1,000, resulting in approximately 0.00785 grams per cubic millimeter for steel.
1,000 cubic mm = 1 mL1 cubic mm = 0.001 mL
1 ml = 1,000 cubic mm
Use steel density of 7850 kg / cubic metre, express all dimensions in metres. > volume = 1 * 1 * 0.02 = 0.02 cubic metres, then: 0.02 cubic metres @ 7850 kg / cubic metre = ( 0.02 * 7850 ) 157 kg
Millimeters (mm) and centimeters (cm) are measurements of length. 1 cm is 10 mm. Cubic millimeters and cubic centimeters measures volume. Cubic millimeters and cubic centimeters (for a cube) are obtained by measuring the length, width, and height of a cubic and calculating its size as follows: A cubic cm = 1 cm x 1 cm x 1 cm = 10 mm x 10 mm x 10 mm = 1000 cubic millimeters
To cubic millimeters: multiply by 1000. To liters: divide by 1000.
1 cm3 = 1000 mm3 because if 1 cm = 10 mm, 1 cm3 = 103 mm3
1 in = 25.4 mm (exactly) 1 cu in = 1 in x 1 in x 1 in = 25.4 mm x 25.4 mm x 25.4 mm = 16387.064 cu mm ⇒ 7.795 cu in = 7.795 x 16387.064 cu mm = 127737.16388 cu mm
I'm assuming you mean a cube with a volume of 4.5 (cubic inches). 1 inch = 25.4 mm, so 1 in3 = (25.4 mm)3 = 16387.064 mm3 4.5 in3 * 16387.064 (mm3 / in3) = 73741.788 mm3
The answer is 2000 cu mm, there are 1000 cu mm to 1 cu cm
The weight of a 12 mm mild steel (MS) plate can be calculated using the formula: Weight = Volume × Density. The density of mild steel is approximately 7850 kg/m³. For a 1 square meter (or 1000 mm x 1000 mm) plate, the volume is 0.012 m³, resulting in a weight of about 94 kg per square meter. Therefore, the weight of a 12 mm MS plate depends on its dimensions but is approximately 94 kg for each square meter.