There is no such thing as the "purity of electrons". A heat sink is used to keep a device reasonably cold.
A device that moves electrons along a path is called a circuit. In a circuit, electrons flow from the negative terminal of a battery, through the components in the circuit, and back to the positive terminal of the battery, creating electrical energy.
An electrical circuit is a path which electrons from a voltage or current source flow. Electric current flows in a closed path called an electric circuit. The point where those electrons enter an electrical circuit is called the "source" of electrons. The point where the electrons leave an electrical circuit is called the "return" or "earth ground". The exit point is called the "return" because electrons always end up at the source when they complete the path of an electrical circuit. The part of an electrical circuit that is between the electrons' starting point and the point where they return to the source is called an electrical circuit's "load".Contents[hide] 1 Electrical-circuits2 Electronic circuits3 Circuit-and-wiring-diagrams4 Circuit-breakers5 Ground-fault-interrupt-(GFI)-devices6 Other websites
In an electrical circuit, the anode is where current flows into the device, while the cathode is where current flows out. The anode is positively charged, attracting electrons, while the cathode is negatively charged, releasing electrons.
yes
The definition of a switch is a device that closes and opens an electrical circuit.
how does input device work
A fuse or circuit breaker will fit this description.
A switch is a device that is used to open and close an electrical circuit that is is connected into.
A series circuit is one in which the current must pass through all the electrical devices in the circuit in turn. A parallel circuit is one in which the current passes through each electrical device on the circuit following separate, independent path from all other devices on the circuit, one for each electrical device.
load
A switch.
No, a fuse is a safety device designed to protect an electrical circuit from excessive current by breaking the circuit when the current exceeds a certain level. It is not meant to store electrical charge.