0
This connector is present on the Macintosh LC, LC II/Performa 400, IIci, IIsi, Quadra 700, Quadra 900/950, Macintosh Duo Dock, and Duo MiniDock. {| ! Pin ! Name ! Description | 1 RED.GND Red ground 2 RED.VID Red video signal 3 /CSYNC Composite synchronization signal 4 SENSE0 Monitor sense signal 0 5 GRN.VID Green video signal 6 GRN.GND Green ground 7 SENSE1 Monitor sense signal 1 (grounded internally) 8 n/c Not connected 9 BLU.VID Blue video signal 10 SENSE2 Monitor sense signal 2 11 C&VSYNC.GND Ground for CSYNC & VSYNC 12 /VSYNC Vertical synchronization signal 13 BLU.GND Blue ground 14 HSYNC.GND HSYNC ground 15 /HSYNC Horizontal synchronization signal Shell CHASSIS.GND Chassis ground |}
What else can I help you with?
Which adapter card uses a 15 pin 3 row port?
A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector. The 15-pin VGA connector is found on many video cards, computer monitors, and some high definition television sets.
What do you plug into a three row 15 pin port?
A three-row 15-pin port, commonly known as a DB-15 connector, is typically used for connecting devices such as a VGA (Video Graphics Array) cable to a monitor or computer for video output. It can also be used for other applications, including some game controllers and MIDI devices. The specific device plugged into this port depends on the intended use, but it primarily serves video and audio interfaces.
3 row 15 pin female connector?
Assuming you mean the "D" shell connector used for computer "VGA" connections to a monitor.It's aD shell (physical appearance),E size,15 connectors,So it's correctly called a DE15, but is often misnamed "DB15" - which it's not. To lessen confusion, many people just refer to it as the "VGA" connector.The common "DB" naming only applies (correctly) to the larger shell size commonly used for the 25-pin DB-25 connector. The small 9-pin D connector is correctly called DE-9.
How a VGA symbol looks like?
A VGA (Video Graphics Array) symbol typically resembles a 15-pin D-sub connector, often depicted in diagrams with a blue color. The symbol includes three rows of pins, with the top and bottom rows containing five pins each and the middle row containing five pins. The connector is usually illustrated with a simple rectangular shape and may include labels for pin numbers or functions.
What do you plug into a 3-row 15-pin port?
A 3-row 15-pin port, often referred to as a DB15 connector, is typically used for connecting various types of devices, most commonly in older computer graphics cards and monitors for VGA connections. It can also be used for game controllers and some serial devices. The specific device you would plug in depends on the application, but VGA cables are the most common usage for this type of port.
How many Skittles on back row in ten pin bowling?
In ten pin bowling, there are four pins on the back row.
How many pins does IDE standard connector have?
It depends, ones for hard drive are i think, about 40 pins, an less for the floppy IDE cable Desktop hard drives have "40" pin connectors; however, the actual number of pins is 39. There is one pin missing in the upper row, middle. I believe the reason for this is so the ribbon won't be connected upside down, it can only go one way.
What is a db9 connector on the back of the computer used for?
A DB-9 connector is a 9-pin connector, approximately 2cm long by 0.75cm wide, with two rows of pins or sockets, a row of 5 and, a row of 4, hence 9 pins total. It is often used in low-speed data communications such as RS-232, and is the connector on personal computers since the IBM PC-AT used for COM ports. There are larger versions with 15 pins, called DB-15 and used for game ports and 10Base5 network AUIs, and 25 pins, called DB-25 and used for earlier COM ports and printer ports among other things.
What is the front pin in bowling starting with king?
The one closest to you is the head pin, or 1 pin. The rest of the pins are numbered from left to right on each row: the second row has the 2 and 3, third has 4, 5 and 6, and the fourth row has 7, 8, 9 and 10.
What is the bowling pin in the back row called?
There are 4 pins in the back row, 7,8,9 and 10.
How are pins numbered on an obd?
On an OBD (On-Board Diagnostics) connector, pins are typically numbered in a specific sequence, usually starting from the top left corner and moving left to right, then down to the next row. For example, in a 16-pin OBD-II connector, pin 1 is at the top left, and pin 16 is at the bottom right. The numbering may vary slightly between different types of connectors, but standardized layouts help ensure consistency across vehicles. It's essential to refer to the specific pinout diagram for each connector type to identify functions accurately.
What vowels are on top row of the computer keyboard?
The vowels on the top row of a computer keyboard are usually "E" and "I".
