answersLogoWhite

0

As a general rule, there are several extra power connectors of varying types on the power supply. This allows for expansion with various drives and devices.

Some power supplies don't provide the serial ATA (SATA) connector. In which case, you can use an adapter power cord to accommodate SATA hard drives.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How many and what type of power connectors does the power supply provide for example three 4 pin Molex connector?

The number and type of power connectors provided by a power supply can vary widely depending on the model. Common types include 4-pin Molex connectors, 6+2 pin PCIe connectors for graphics cards, SATA power connectors for drives, and 24-pin ATX connectors for the motherboard. For instance, a typical power supply might provide three 4-pin Molex connectors, four SATA connectors, and two 6+2 pin PCIe connectors. Always refer to the specifications of the specific power supply for accurate details.


Are there any connectors your system needs the power supply doesn't have?

Most often, power supplies for any type of equipment is givin to you when you buy what the power supply is for.


Is ATX power supply can be used in place of AT power supply?

No because they have different connectors.


What are power supply connectors in computers?

Molex and Sata


How do you test a computer power supply?

You can get a power supply tester on ebay for $5. It will test all the connectors.


What is the power supply that has two connectors to supply the main power to the motherboard?

If it as a 20 or 24 pin connector and a 4 pin connector then it is a ATX power supply.


What are the 3 basic types of connectors on a PC power supply?

AT Power Supply - still in use in older PCs.ATX Power Supply - commonly in use today.ATX-2 Power Supply - recently new standard.


What connectors from a power supply should be used with a graphics expansion card?

Graphics expansion cards typically require one or more 6-pin or 8-pin PCIe power connectors from the power supply. Some high-end graphics cards may also use dual 8-pin connectors or a combination of 6-pin and 8-pin connectors for additional power. It's essential to ensure that the power supply has the appropriate connectors and sufficient wattage to support the graphics card's power requirements. Always consult the graphics card's manual for specific power connector needs.


Why do system unit manufacturers usually include the power supply as part of the purchase?

System Unit manufacturers usually include the power supply as part of the purchase because it prevents users from selecting too many devices (drives and cards) for the size of the case. They system unit case is usually provided with a power supply capable of running the number of devices its given size will support.


What is the minimum system memory required for the ATI Radeon HD 4890?

The minimum system memory required for the ATI Radeon HD 4890 is 500 Watt or greater power supply with two 75W 6-pin PCI Expresså¨ power connectors recommended.


What indicates the power supply sending steady power to the system board or VRM?

what indicates the power supply sending steady power to the system board


Why would power run to your computer's fan but nothing else?

If another power supply doesn't work, it's likely your motherboard has failed. It could be that you need to buy a new processor. It may be "fried." However, there may be other causes. It could be as simple as reseating drive cables, power connectors, etc. There is not enough information in the original question to determine what the problem is. (Which fan is on, the power supply or CPU fan or one of the case fans?) A Power supply can be strong enough to get the fan going but not enough juice to power up the system! That ia a weak Power supply that can power up a fan but not the system, try another power supply.