The two are not mutually exclusive. However, the card reader must have the firmware necessary to read an SDHC card. If the device is more than a couple years old, there probably aren't any updates available to add this functionality.
I have an acer 5100, and I have not been able to read sdhc cards with my sd reader.
"It comes with an adapter" No - all the adapter does is makes it from a micro SD card into a (standard size) SD card.Not sure you can do anything to convert it from SDHC to SD as they physically address the memory differently. Your equipment has to be SDHC compatible to read/use them.* SD compatible equipment - Will read/write to SD cards but WILL NOT read/write SDHC cards* SDHC compatible equipment - Will read/write both SD and SDHC cards
Because the SD card reader is not compatible with SDHC cards
An SD card is a Digital media card, and they make them up to 2GB in size. An SDHC is the same thing, but it has High Capacity, and and you can get them from 4GB to 32GB in file size. The difference is file size, that is all. an SD card is 512MB-2GB and an SDHC is 4GB-32GB. For more information on SD cards, visit www.sdcard.com
32GB is the largest card you can find for purchase. Surely there is some rediculous SD card in some lab somewhere, but for now your best bet is 32 GB SDHC. Keep in mind your SD card reader needs to support SDHC. Check it first.
Yes for the majority a memory card reader can read an SD card. An SD card is actually one of the most popular memory cards available right now.
A SD or SDHC card is a card that collects an stores data. It is developed by a company named SanDisk hence the SD and some can store more han others and the ones that can store a whole lot are callled SDHC cards. The HC stands for High Capacity. So an SDHC card is technically a SanDisk High Capacity card and a SD card is a SanDisk card. get it
A USB SD card reader is a device that will read an SD card (like the ones used in cameras and PDAs) and send the information to the computer via USB. They will usually read other cards too.
Yes. Reformat the micro SD card before installing the kernel for the R4i SDHC. R4i sdhc card from r4i-sdhc.com accept a MicroSD card to run games and medias on Nintendo console. The MicroSD card is used for saveing R4i SDHC kernel and games. Such as Kingston or Sandisk. If you buy a r4i sdhc card, you should also take a Micro SD card.
You can format your SD card, or use a sd-usb reader that you can plug into your USB port. Otherwise, you can try using SD cards of a different size. Sometimes SDHC cards do not work in some slots.
A USB SD card reader is a device that will read an SD card (like the ones used in cameras and PDAs) and send the information to the computer via USB. They will usually read other cards too.
The Sandisk Extreme III bundled reader will unfortunately only read SD and SDHC cards.