answersLogoWhite

0

Like to run on a DC powered machine? Probably the easiest and safest way would be to buy a standard power inverter.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What voltage does the power supply uses in US?

Input would be 120v at 60hz. Standard US wall power.


Can you take single phase of 120V with a hot wire and a neutral step up to 480v and then step down to 2 phases of 120V or do you have to input 2 phases of 120v to get 240V out?

Theoretically that can be done with transformers, but the power available would still be limited by the circuit breaker on the original 120 v supply.


Can you convert 120v household into 220v 3 phase for a machine?

No, you cannot directly convert a 120V household outlet to supply 220V 3-phase power for a machine. You would need a transformer to step up the voltage and a suitable 3-phase power source to provide the required power for the machine. It is recommended to consult with a licensed electrician to ensure proper installation and safety compliance.


How do you wire 12V AC to 120V DC?

You would need a 12VDC to 120VAC power supply.


Can you use a 120V Dewalt battery charger rated 120V 60Hz off of a step down transformer putting out 120V 50Hz?

It will charge the battery a few times, but eventually it will ruin the battery. The problem is the difference in the Hz. The charger is designed to convert power at a specific level to DC power. When the input power is not at the needed pulse rate, in this case 60 Hz, it will not emit the correct DC voltage and slowly reduce the batteries capacity to hold a charge. If you want to continue using the 60 Hz charger, you need to convert the 50 Hz power into 60 Hz by filtering it through a battery. Example: Step down transformer 50 Hz 120v --> Battery supply (Uninterruptable Power Supply that can handle 50 ~ 60 Hz) --> Dewalt 60 Hz battery charger.... Or you can skip the science project and buy a 50Hz Dewalt battery charger. You may need a plug converter depending on the type of outlet you are using and the plug type the charger will come with.


What does a power supply?

...It "supplies the power" to whatever device you're referring to.Baffling, I know.Another answer:A power supply converts 120V or 240V AC power (sometimes called "wall", "line" or "mains" power) into various regulated DC voltages needed in a piece of electronic equipment. In a computer, for example, the power supply will typically provide +12V, +5V, +3.3V and -12V sources to the various components. Voltage regulators in the power supply help keep the voltages steady, even when the input voltage sags.


What a power supply do?

...It "supplies the power" to whatever device you're referring to.Baffling, I know.Another answer:A power supply converts 120V or 240V AC power (sometimes called "wall", "line" or "mains" power) into various regulated DC voltages needed in a piece of electronic equipment. In a computer, for example, the power supply will typically provide +12V, +5V, +3.3V and -12V sources to the various components. Voltage regulators in the power supply help keep the voltages steady, even when the input voltage sags.


Find a power supply 120 volt ac 9 watt output 6volt ac?

You can use a step-down transformer to convert the 120V AC input to 6V AC output. Look for a transformer that can handle at least 9 Watts output power, to ensure compatibility with your device. Make sure to double-check the specifications and ensure the transformer meets your power requirements before making a purchase.


Can you get a 230v supply from a 120v 3ph supply?

Yes.


What type of diode is a msc 8832 s 2140?

120v/12v 30amp power supply comes to mind.


How to convert 120v to 240v for electrical appliances?

To convert 120v to 240v for electrical appliances, you can use a step-up transformer. This device increases the voltage from 120v to 240v, allowing you to safely power appliances that require the higher voltage. Make sure to follow all safety precautions and consult a professional if needed.


Introduction of DC to ac inverter?

A DC to AC inverter takes a DC voltage input to a AC voltage output. So if you have a 12v battery and need to run a 120v AC tool or something. All you need to do is plug a inverter to your battery and plug your 120v tool the the inverter. Takes all there is too it.