0
What else can I help you with?
How to connect hard disk with sata 3 to sata 1 port?
SATA 3 is backwards compatible, it means you connect it the same way as SATA 1.
What are the CD ports on computers called?
Internal CD ROMs and DVD ROMs plug into either SATA, ATA (PATA), or SCSI sockets. External drives plug into USB, E-SATA, or Firewire sockets.
Why does your SATA hard disk detected as plug and play just like flash disk Is it normal?
SATA hard drives are hot swappable, meaning that you can can unplug it while the computer is on just like a flash disk. Make sure that the power is already connected, it is not recommended to plug in the power connector while the machine is powered on. The SATA data cable is plug and play.
What is the maximum bandwidth of SATA?
Speed of sata 1 is 1.5 Gbps Speed of sata 2 is 3 Gbps
Can you plug sata discs into sata 2 connectors on motherboard?
Yes. You can add as many hard drives, or other sata devices (DVD burners etc) as will fit into your case, or until you have no more sata connectors free.
Ide hard drive can be slave with sata hard drive?
No Master Slave designation needed. SATA Drives are plug-add-play. Improve: SATA (Serial) Attached Drives improve data tansfer speeds up to 10-100 GBytes/per. eSATA are (Externally) Serial-Attached Drives and SATA-II(Sata-2) Drives transfer data @ 300GBytes/per. The next barrier of TerraByte data transfer has been developed and is already in production with a (SATA-3) designation attached
What is the transfer speed for sata?
Ø SATA I- 1.5 Gb/sec, SATA II- 3 Gb/sec and SATA III- 6 Gb/sec
What is a SATA Expansion Card?
Serial ATA is a type of hard drive connector and standard. Instead of a 40-pin parallel ATA plug, is uses around 6 wires to send the data in a serial fashion. If you don't have SATA sockets or not enough for your needs, then you have to install an expansion card with SATA connectors. They are available for different types of expansion sockets, support different SATA standards (generation 3 is the current standard), and have different numbers of SATA sockets.
Will sata 2 run on sata 1?
Yes, SATA II (SATA 3 Gb/s) devices are backward compatible with SATA I (SATA 1.5 Gb/s) interfaces. This means that you can connect a SATA II hard drive or SSD to a SATA I motherboard, but the drive will operate at the lower SATA I speed. However, if you connect a SATA I drive to a SATA II interface, it will run at the SATA I speed as well.
What is the transfer speed for SATA 12and3?
Ø SATA I- 1.5 Gb/sec, SATA II- 3 Gb/sec and SATA III- 6 Gb/sec
How can you make a SATA drive work on a motherboard that only has a PATA connector?
Well... First, you have to plug it in..
Is sata 3.0 backward compatible with sata 1.5?
If you plug a SATA 3.0 drive into a SATA 1.5 port on your motherboard, the drive should be able to function at a 1.5Gb/s transfer rate. Some drives require a jumper setting, while others natively recognize their allocated bandwidth and adjust accordingly.
