Usually any Ethernet controller will be soldered into the motherboard. You may or may not be able to remove / replace a wireless controller. You can almost always supplement your laptop with a new controller on an expansion bus, even if the old one cannot be removed.
Type your answer here... yes, we can connect a nic to a nic. A nic is a Network Interface Card which has a unique MAC. When we connect two devices(say laptops) using a lan cable,we actually connect their nics.
The NIC (Network Interface Card) is typically located inside a computer or device, either integrated into the motherboard or installed as a separate expansion card in a PCI or PCIe slot. In desktop computers, it can usually be found near the back of the case, where the network ports are accessible. In laptops, the NIC is often built into the motherboard, making it less accessible without disassembly.
NIC is the abbreviation used when referring to a network card.
NIC - Network Interface card (sometimes also called a network adaptor card).
Either replace the NIC card, change the cables, and/or network connection devices to a higher speed.
NIC is abbreaviation for Network Interface Card
Often referred to as a "wi-fi" card, a NIC or "network interface card" is used to intercept signal output from another device such as a router. Most modern laptops carry an 802.11 card.
a Network Interface Card
It is used to connect the computers to the hub
Ethernet NIC: A network interface card (NIC) designed to connect a device to an Ethernet network using an RJ45 port. Wireless NIC: A network interface card (NIC) equipped with wireless capabilities to connect a device to Wi-Fi networks.
To connect with other computers. A NIC is a network card.
A video card or video adapter translates binary data into images.