4kb = 2^12 2^32 / 2^12 = 2^20
There is no physical address.
To calculate the physical address from a logical address, you can use the base address and offset. Add the base address to the offset to get the physical address. This process is commonly used in computer systems to translate logical addresses to physical addresses for memory access.
The physical address is in binary, just like everything else in the computer. Other bases, such as octal, (decimal,) and hexadecimal are simply representations for our convenience.
Without a physical address, you will not be able to access a network outside the LAN that you are on. This is simply due to the fact that the computer on another LAN would not know where to forward the requested information. Your IP address work on the Internet Protocol within routers and switches, and associates it finding with your local machine (computer) by way of its mac address (physical address). Notice, your computer does not have an IP address, when you log on to the Internet a DHCP server issue you a leased IP address which is associated with your MAC for the duration of time that your computer is log on to the NET. There are quite a few reasons why your computer would not be network operable without a MAC address, this is just one of them.
In the 8086/8088 the physical address and logical address have the same importance, because they both relate to the address of the operand. It is true that the offset (logical) address is added to the segment address to determine the physical address, but the limitations of the architecture of the processor forces programmers to consider both.If you are talking about a virtual environment, however, such as in the 80286 or higher, then the logical address is more important than the physical address, because the logical address is the address of the operand, while the physical address is (somewhat) arbitrarily assigned by the operating system.
LDA in terms of computer system architecture stands for Logical Device Address. A LDA is a one byte address (i.e an upper MAC address) and there is no physical address (i.e lower MAC address) specified.
In computer systems, the virtual address to physical address mapping works through a process called address translation. The operating system manages this mapping by using a page table, which stores the correspondence between virtual addresses used by programs and their corresponding physical memory locations. When a program accesses a virtual address, the operating system translates it to the corresponding physical address to retrieve the data stored in memory. This allows programs to efficiently access and manipulate data without needing to know the physical location of the memory.
Using NAT a computer fails to locate a DHCP server . NAT is method that provide mapping between private and universal addresses. Network address translation also supports VPN .
You don't need to provide any physical address or data about your computer to have and internet connection. The Computer Numeric address or configuration ID should not be asked. The internet provider may have asked so that you cannot use the internet on any other system and it will need configuration to connect from other PC.
Using NAT a computer fails to locate a DHCP server . NAT is method that provide mapping between private and universal addresses. Network address translation also supports VPN .
In computer networking, a node refers to a connection point. It has two types of addresses, a network address and a physical address.
A PC's physical adress is the location of where the computer is. When you get internet it registers where you live thus making your physical adress of your computer. The physical adress is used for finding the location of someone through their computer, it is most often used for tracking people who have been using it illegaly eg. hacking, p2p etc. Hope this helps