A standard cubic foot (abbreviated as scf) is a measure of quantity of gas, equal to a cubic foot of volume at temperature of 60 degrees Fahrenheit and pressure of either 14.696 psig or 14.73 psig (30 inHg)
359 is the number of standard cubic per lb-mol of a gas. The initial answer is actually the inverse. An easy mistake to make. Example: 18 lbs of water is one lb-mol. As a gas it would be 359 cubic feet of gas at standard temp and pressure.
A standard cubic foot of natural gas has 1000 BTU. A Barrel of Oil equivalent has 5800000 BTU. It is 0.000172 BBL per cufic foot of gas.
1 standard cubic foot of natural gas gives about 1030 BTU
There are 7.48 gallons in a cubic foot
Ther are 1,050 BTU in one cubic foot of natural gas.
Specifically 1013.2 btu per standard cubic foot, for pure methane.
at $2.15 a gallon, one cubic foot is $0.0591
The BTU (British Thermal Unit) rating of natural gas typically ranges from 950 to 1,100 BTUs per cubic foot. This measurement indicates the energy content of natural gas and is used to determine its heating value.
The heat content of natural gas is typically measured in British Thermal Units (BTU) per standard cubic foot. The range can vary but it's commonly around 1,000 BTU per cubic foot. When calculating BTU per square foot, you would need to factor in the gas consumption rate to determine the BTU output for a specific area.
To calculate the volume of natural gas in standard cubic meter at standard pressure, you can use the ideal gas law equation: V = nRT/P, where V is the volume in standard cubic meters, n is the number of moles of gas, R is the ideal gas constant, T is the temperature in Kelvin, and P is the standard pressure. Given that standard pressure is typically defined as 1 atmosphere or 101.325 kPa, you can plug in these values along with the temperature and number of moles of gas to calculate the volume of natural gas in standard cubic meter at standard pressure.
In US units, one standard cubic foot of natural gas produces around 1,030 BTU.
Gas is not measured in feet.