0
The 'Ether' part of Ethernet denotes that the system is not meant to be restricted for use on only one medium type, copper cables, fibre cables and even radio waves can be used.
Fast Ethernet Network was developed as an upgrade to traditional Ethernet Networking. Fast Ethernet improved traditional Ethernet by increasing transfer rates 10 times, from 10 Megabit to 100 Megabit speed.
Gigabit Ethernet Network is an upgrade on Fast Ethernet Network equivalent to Fast Ethernet Networks improvement over Fast Ethernet Network, offering speeds of 1000 Megabits (1 Gigabit)
Cisco have a good document with diagrams and a reasonable amount of depth that answers your questions on 10/100/1000 Ethernet. See related link.
Ethernet card would be 10Mbps (mega bauds per second) Fast Ethernet card would be 100Mbps. Most ethernet cards sold today are Fast Ethernet or better. Look for the 100Mbps or the 10/100Mbps specification. The only difference between the both is the speed.
Hence both cards are basically the same using the same technology except the fast Ethernet card can run on 10/100mb/s, an astonishing speed.
Original 10Base2, 10Base5 and 10baseT Ethernet (thin coaxial cable, thick coaxial cable and twisted pair, respectively) specifications offered a 10Mbit/second throughput (data transfer rate). Although 1 Byte is 8 bits, 10Mbits in practice doesn't mean 1.25MBytes/second, because there's some extra information transferred. On average it can be seen as a ~1MByte/second link speed.
Then new standards appeared, some of them exotic (like 100VG AnyLan), but the new Ethernet standard was 100baseTX, which used twisted pair (like 10baseT, but with slightly higher quality requirements - Category 5 cable). It has been called Fast Ethernet, as it offered 100Mbit/sec transfer speed, a 10-fold improvement. Usually all the network equipment can talk both 10baseT and 100baseTX (for example network switches have "10/100" ports).
But this was not enough - then came a next speed-up: the 1000baseTX, still running on twisted pair, but with even higher cable quality requirements, offering 1000Mbit/s transfer speed, thus called Gigabit Ethernet: 1000 Mega = 1 Giga.
What else can I help you with?
What is differene between fast ehternet and gigabit Ethernet?
Fast Ethernet runs at 100Mbit and requires CAT5e cables. Gigabit Ethernet is 1,000Mbit and requires CAT6 cables
Name three types of ethernet?
10-Mbps Ethernet, 100-Mbps or Fast Ethernet, and 1000-Mbps or Gigabit Ethernet.
Opportunities in using Gigabit Ethernet over Fast Ethernet?
If you want greater speed, why not use gigabit ethernet? Just remember that all the devices and cabling must be capable of that speed or you won't actually see that speed.
What is the capacity of Ethernet?
Ethernet capacity varies depending on the standard used. The most common Ethernet standards include Fast Ethernet (100 Mbps), Gigabit Ethernet (1 Gbps), 10 Gigabit Ethernet (10 Gbps), and newer standards like 100 Gigabit Ethernet and beyond. Modern Ethernet technologies can support speeds up to 400 Gbps and even 800 Gbps in specialized applications. The capacity also depends on factors like cable type, network design, and distance.
What is the differences between Ethernet and fast Ethernet?
Ethernet is an alternative way of connecting to the internet when given wireless connection. It offers speeds of up to 10Mbps and four hubs can be cascaded between two stations. On the contrary, fast Ethernet has reduced number of hubs and offers speeds of up to 100Mbps.
What is the difference between FE and GE Port?
FE means Fast Ethernet having bandwidth 100 Mbps ,SFP 850 nm or 1310 nm GE means gigabit Ethernet hving bandwidth 1000Mbps ,SFP 1550 nm
What is the working of cat5 and cat 6 cables?
cat 6 is always a regiment cable usually gigabit ethernet, it is backward compatible.Cat 5 usually can handle 10/100Mbps which is a fast ethernet.
What is a gigabit port on a wireless router?
Gigabit port on a wireless router is the latest network technology that supports data transmission rates up to 1000Mbps over a network cable compared to a fast Ethernet connection which peaks at 100Mbps. networkrepairs.ca
What the standard represent of ethernet technologies?
Ethernet technologies are standardized primarily by the Institute of Electrical and Electronics Engineers (IEEE), particularly under the IEEE 802.3 working group. These standards define various aspects of Ethernet, including physical media, data rates, and frame formats, enabling compatibility and interoperability between different devices and networks. Common standards include Fast Ethernet (100 Mbps), Gigabit Ethernet (1 Gbps), and 10 Gigabit Ethernet (10 Gbps), each serving specific networking needs. Overall, Ethernet has evolved to support higher speeds and improved performance while maintaining its foundational principles of simplicity and robustness.
Why are there 8 wires in an Ethernet cable?
In Cat 5 cable based on fast ethernet (100 mbsp) 4 are used to Send and Receive. The other 4 wires are unused. All 8 wires are used for gigabit communications.
What is speed of 100 MB Ethernet?
The speed of 100 MB Ethernet, commonly referred to as Fast Ethernet, is 100 megabits per second (Mbps). This standard supports data transmission over twisted-pair cables and fiber optics. Fast Ethernet is widely used in local area networks (LANs) for connecting devices such as computers and switches. It is capable of handling typical network traffic demands but has largely been superseded by faster standards like Gigabit Ethernet.
1 Name three types of Ethernet What transmission speed does each support?
(From: Jean Andrews CompTIA A+ 6th Edition pg. 846) The three variations of Ethernet are primarily distinguished from one another by speed: (1) 10-Mbps Ethernet, (2) 100-Mbps or Fast Ethernet, and (3) 1000-Mbps or Gigabit Ethernet.
