0
What else can I help you with?
Where do you get your subnet number from?
You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).
What is ip subnet-zero?
If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.
What device do you use to divide subnets?
To divide subnets, network engineers typically use a router or a layer 3 switch. These devices can interpret IP addresses and manage traffic between different subnets by routing packets accordingly. Additionally, subnetting can be configured within the device's settings, allowing for efficient management of IP address allocation and enhancing network performance.
How many valid subnets do you get if you borrow 3 bits?
When you borrow 3 bits from the host portion of an IP address, you can create (2^3 = 8) valid subnets. However, one subnet is reserved for the network address and another for the broadcast address, leaving you with 6 usable subnets. Thus, by borrowing 3 bits, you obtain 6 valid subnets for use.
How do you use 172.16.0.0 to create 6 subnets?
To create 6 subnets from the IP address 172.16.0.0, you need to determine how many bits to borrow from the host portion of the address. Since 2^3 = 8, borrowing 3 bits allows for 8 subnets, which is sufficient for your requirement of 6. This results in a subnet mask of 255.255.248.0 (or /21), providing each subnet with 2046 usable host addresses. The subnets would range from 172.16.0.0/21 to 172.16.7.0/21.
If you sub divide your class b network into 254 subnets what is the maximun number of host you can assign to any single subnet?
1
What subnet mask would divide 172.31.0.0 network into as many subnets as possible and can support 600 users on each subnet?
A subnet mask that would divide the 172.31.0.0 network into as many subnets as possible and support 600 uers on each subnet would be 255.255.255.0. Each subnet can communicate with each other through the gateway.
What is a static length subnet mask?
That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.
How do you implement subnetting?
To implement subnetting, first determine the network's requirements, including the number of subnets and hosts per subnet. Next, choose a suitable subnet mask that allows for the desired number of subnets and hosts by calculating the available bits in the IP address. Divide the IP address space into subnets based on the selected mask, ensuring that each subnet has a unique network address. Finally, configure the devices on the network to recognize the new subnets by updating their IP addresses and subnet masks accordingly.
How can subnet provide security?
By subnetting you can divide the network in to separate enclaves and impose controls between them - if one subnet is compromised, it does not automatically grant access to other subnets.
How do you divide class B network into eight subnets?
From the 16 bits reserved for the host, you "lend" 3 bits for the subnet. That gives you the possibility of dividing into eight subnets. The remaining 13 bits indicate the host in each subnet. - To see the complete steps in more detail, do some Internet searching on subnetting.
Several reasons to divide a network into subnets?
Networks are divided into smaller subnets to reduce the size of broadcast domains, but mainly for administrative purposes - so you can control who has access to what, for example.Networks are divided into smaller subnets to reduce the size of broadcast domains, but mainly for administrative purposes - so you can control who has access to what, for example.Networks are divided into smaller subnets to reduce the size of broadcast domains, but mainly for administrative purposes - so you can control who has access to what, for example.Networks are divided into smaller subnets to reduce the size of broadcast domains, but mainly for administrative purposes - so you can control who has access to what, for example.
