0
What else can I help you with?
Which can be used to provide a form of default tolerance for a file server on your network?
Add an additional network card to the serverAdd an additional network card to the server
Which of the following can be used as a form of fault tolerance for your file server?
Add an additional network card to the server.
Why do you frequently receive server not found errors?
You have problems either with network connection, proxy server if you have any, or firewall. Also in can your network card which is actually the worst case.
Are the messages and history on your sim card?
No - they're held on the network's server - and downloaded 'as required' !
What dvice allows you to integrate a proprietary server that only contains a fiber optic network card into your utp cabled network?
Media converter
Why does each workstation need a network card?
Because without the network card in the work station it would have no way to communicate with the central server which probably stores all the information centrally, obviously. It is also related to the sharing of printers and the internet around in the network. Therefore the use of the network card is to allow communication between the work station and the server via ethernet cables and network bridges. These could also be wireless meaning cableing would not be needed, but are not as quick or reliable, and also has a far greater risk of getting hacked into the network.
Under what circumstances do you need to create a remote installation boot disk for a client computer to allow it to connect to an ris server?
The client's BIOS doesn't support network card boots, the client does not have a PXE-enabled network adapter card.
What is the name of the card that enables communication with the server?
server communication card
What using either a windows xp or windows 2000 workstation what components do you need to connect to a Microsoft network server?
To connect a Windows XP or Windows 2000 workstation to a Microsoft network server, you need a functional network interface card (NIC) to enable network communication. Additionally, the workstation must have the appropriate network protocols installed, typically TCP/IP, and be configured with the correct IP settings. You'll also need to ensure that the workstation is part of the same workgroup or domain as the network server. Lastly, valid user credentials (username and password) are required to access shared resources on the server.
How do you host a local site on just a single computer?
You simply install and start web server software. That software opens port 80 and starts listening for HTTP network requests. You can then connect to that port using the address 127.0.0.1. Note that you must have at least some network hardware available for this to work in Windows. It is not enough, in Windows, to have a network card, the card must be attached to something. If you have a wireless network card, enabling that card will enable the entire network infrastructure and make the network available; but if you have a wired card, you must connect it to a router, even if the router is not connected to anything, or you must download a "network loopback driver" from Microsoft.
The card provides a port for a network cable to connect the PC to a network?
Lan Card provides a port for a network cable to connect the pc to a network.. LAN : Local area network or Ethernet Card and Network Card
How can you configure a Win XP client workstation and Win 2000 Advance Server to make the network robust or fast?
The first thing to ensure that you are running the NIC on the client at Full Duplex and also ensure that the switch that you are using to connect to the server is running a Gibabit NOC and running 1000SX and not running 100TXUsing your scenario of one server and one computerServer - At least two Gigabit network cards. Team the network cards up so that they act as one.Network - A managed Gigabit switch. Use port aggregation where the server network cards are connected.XP workstation - Gigabit network card.
