0
What else can I help you with?
What is an eide cable?
The cable connects between the motherboard of the computer and the hard-drive or optical drive.
How can you connect a printer to a computer?
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
Can the WII be connected to a computer using a usb cable?
No
Device connected by cable to CPU of computer?
peripheral
External drives are typically connected to the computer by?
a cable.
What is the audio out cable on a CD ROM connected to in the computer?
YouQ=?
Your yellow cable from your router has nowhere to fit in your computer you have a netgear 4 port router?
'Yellow' is descriptive but does not identify the cable. A description of the ends of the cable would be helpful. However, if your computer is connected to the network then the yellow cable is unnecessary. It may be a management cable or an alternative connection. If your computer is not connected to the network then it is likely that the yellow cable is the rj-45 connection and that you need to install a network card for your computer.
How is your printer connected to your computer?
your printer can be connected to the computer in two ways. 1. the printer can be connected by a usb (universal serial bus) cable to the computer. 2. the computer can also transmit data via a network.
If you disconnect the patch cable that connects your computer to the modem and then reconnect it do you have to reinstall anything?
No. The computer software installed is not affected by the cable being connected.
How do you hook up mbox2 to computer?
The MBox2 is connected with a USB cable.
What is more common term for digital optical audio cable?
More common terms for digital optical audio cable; optical audio cable, cable, digital optical, but the shortest and most well-known term is "cable".
Why does a battery terminal spark when connecting?
ALWAYS, ALWAYS, ALWAYS connect the (+) cable FIRST. The reason it sparked was the ( - ) negative cable was already connected.
