A multiplexer breaks large amounts of data into smaller chunks so that the processor can manipulate it more easily and give back the processed data in pieces when it finishes processing it. A multiplexer is also responsible for breaking up the data if you have more than one processor or core (as in dual core) in your computer.
It is the enable line. Used to enable the multiplexer to function. For low enable multiplexers, strobe is set to 0 to enable the multiplexer whereas in high enable multiplexers, it is set 1 to enable the multiplexer.
function of the processor is to process data
It allows a single controlsystem to control many devices.
The major function of the processor in a computer is the operation controls and executions. The processor is essentially what controls the data coming in and going out of the computer system.
The processor time is a function of the processor. The memory allocation is a function of the operating system.
function of the processor is to process data
f = ~s.a + s.b , thus is the function for a multiplexer. let a not gate with input x and output y. set a = 1 and b =0 to get a not gate. y = ~x.1 + x.0
draw the Z80 processor and explain five of its pin function
Statistical multiplexer does not reserve time slots or frequencies. Instead, it dynamically allocates bandwidth only when it is needed.
Statistical multiplexer does not reserve time slots or frequencies. Instead, it dynamically allocates bandwidth only when it is needed.
An electronics multiplexer will select an output by a digital code. a mechanical multiplexer will select an out by a mechanical switch of sort possibly driven by a motor
system on a chip