answersLogoWhite

0

What else can I help you with?

Related Questions

A QAM configuration uses four phases and one amplitude with a given bit rate of 1200 bps what is the minimum required bandwidth?

600


Starting elo chess.com, what is the minimum rating required to participate in the upcoming tournament?

To participate in the upcoming tournament on chess.com, the minimum rating required is 1200.


What are the minimum number of vents required for a 3 ton central air conditioning system?

The installation and maintenance manual for your unit should tell you that. I would say 8-10 and a minimum air flow of around 1200 cfm.


How many 20x20 inch tiles does it take to cover 1200 sq feet?

1200 sq ft = 1200*144 = 172800 sq inches. Each tile = 20*20 = 400 sq inches So minimum number of tiles required = 432. However, this assumes that the shape to be tiled is well behaved and that there is no wastage.


How much would a 1920 Tiffany lamp auction for?

£1200 minimum


What is the minimum cc bike you can ride on motorway?

50cc - 600cc


What does the number 12.9 mean on a bolt?

12*10=1200 is minimum tensile strength 90% of 1200 i.e. 1200*.9=1080 is elongation yield limit units are N/mm2


What is the Minimum required channel bandwidth of a 4 bit word operating at 9600 bps?

According to Nyquist Signaling Theorem:Rmax = 2Wc pulse/secondwhere R is the maximum transmission rate in pulse/secondWc is the channel bandwidthIn your case you have R in bit/s, so the theorem becomesRmax = 2Wc *m bit/secondwhere m is the number bits in each pulse, i.e. bit/pulseSo the solution to your problem isWc=9600/(2*4)=1200 HzRegards,


How to Solve The acute angle between the hour hand and minute hand of a clock at 4 PM. Ans given 1200.?

1200


How much is 1200 points in Xbox live?

1200 points is $15 (US dollars), given the conversion 80 points= $1


What type of oil is required for a 2006 sportster 1200 transmission?

Formula+ or Syn3


What are minimum clearance 1200 amp system?

Minimum clearance for a 1200 amp electrical system typically refers to the space required around electrical equipment to ensure safe operation and maintenance. Generally, the National Electrical Code (NEC) recommends a minimum clearance of 3 feet in front of electrical panels and a minimum of 1 foot on the sides, although specific requirements may vary based on local codes and equipment type. Adequate clearance helps prevent overheating, allows for proper ventilation, and ensures safe access for maintenance and emergency situations. Always consult local regulations and electrical codes for precise requirements.