IDK, i have to do this in tech, this is a difficult question.
To handle these components properly you need latex gloves, an extra large body suit.
and a trained professional. I happend to have all.
you need to carry the circut bored carefully, don<t even look at it, run with your eyes closed and your hands covering your ears. Some people will say different answers but this is the only correct way. Have three toes crossed on your right foot, and one on your left.
Scream the song Mary had a little lamb as your are running.
Processor, RAM, daughter cards, CMOS, Heat sink
1. CPU Central Processing Unit ( The brain of the computer). 2. HDD Hard disk drive. 3.CMOS The battery. 4.VGA Card and Network Card. 5. Pc board You're wrong noob
The FRU components of an older AT motherboard are: Processor, RAM, RAM cache, ROM BIOS chip and CMOS battery.
Three common reasons for losing CMOS data include power loss, such as when a computer is unplugged or the battery fails; hardware changes, like replacing the motherboard or removing components that affect the CMOS chip; and corruption due to malware or software errors, which can disrupt the settings stored in the CMOS. Regularly replacing the CMOS battery and ensuring proper shutdown procedures can help prevent these issues.
You do not need CMOS circuits per se but that's the way many modern components are manufactured. Complementary metal-oxide-semiconductor (CMOS) is a technology for constructing integrated circuits. CMOS technology is used inmicroprocessors, microcontrollers, static RAM, and other digital logic circuits. CMOS technology is also used for a wide variety of analog circuits such as image sensors, data converters, and highly integrated transceivers for many types of communication.
A CMOS socket is to plug a CMOS transistor into. Alternatively, a CMOS socket is to plug a CMOS integrated circuit into. CMOS, by the way, stands for, "Complementary Metal Oxide Semiconductor".
In the start up process when the system is verifying components press f1, or f8..., and you can get access to the BIOS setup.
although very sensitive to static electricity, CMOS is very stable compared to other (older) technologies. it also can handle wider voltage ranges (standard 3.3volt to 18volt) upto 40volt in some cases. in addition CMOS requires very little current (amps) compared to other technologies (1/1000 of amps required for ttl) the static problem is overcome with good handling practices (always earth your hand and handling equipment to each other)
Cmos ram.
Modern PCs store the CMOS password in the CMOS memory itself.
CMOS
yes it is stored in CMOS