you need appropriate cooling system, some chips will be better overclockers than others. You should remove the cooler, clean the thermal paste, apply a fresh batch and then re-mount the cooler. You should not need overclocking if you replace youe system with up to date hardware.
The best way is to never let it get hot in the first place, by making sure you have a cooling system designed for an overclocked processor.
Overheating. Is it overclocked, is there dust in the power supply, is there no air flow. Very common in laptops.
You will have to know the default processor and system bus frequencies, you can find the specifications for the processor on the manufacturer's website. Once you have that information, go into the BIOS and check to make sure the speeds match, or are close to the manufacturer's specifications. If these numbers are higher, then you have an overclocked system. Just restore the processor and system bus frequencies to default values to correct the issue.
Overheating
overclocked
Cooling system leak or engine overheating and steam escaping from the radiator cap.Cooling system leak or engine overheating and steam escaping from the radiator cap.
There are many reasons why a Jeep Wrangler is overheating. A leak in the radiator system will cause overheating. Too much pressure in the engine can cause overheating. A bad water pump or thermostat could cause overheating. The transmission can also cause overheating if it is leaking.
Your brakes may be overheating due to excessive use, worn brake pads, or a malfunctioning brake system. To prevent overheating, you can avoid aggressive braking, have your brakes inspected regularly, and ensure proper maintenance of your brake system.
There are several things that can cause transmission overheating. One of the most common causes is overloading or overworking a system.
Bulimia Nervosa
overheating
The most effective one is to opt for liquid cooling system. They system itself will depend on your configuration and what your CPU cabinet can accommodate. Air cooling is a cheaper and less effective solution.