In order to Calculate the weight of a hollow cylinder, you need to find out the density of the material of the cylinder first. once you have that, you can use the formulas below
Find out volume of material as follows:
Volume = Pi * (Outer Diameter of Cylinder)2/4 - Pi * (Inner Diameter of Cylinder)2/4
Mass = Density * Volume( from above equation)
Note: Remember that units of Density and volume should be matching.
The pressure inside an inverted hollow cylinder in water is equal to the pressure at the depth of the cylinder's centroid multiplied by the specific weight of water. To calculate it, use the formula: pressure = (specific weight of water) * (depth of centroid of cylinder).
Find every thing
weight of ms hollow bar 20mm*20mm
The cylinder will support, at neutral buoyancy, as much weight as the weight of water it could contain, less the weight of the cylinder itself.
To calculate the mass of a hollow tube, you need to know the outer diameter, inner diameter, and length of the tube. First, calculate the volume of the tube by subtracting the volume of the inner hole from the volume of the outer cylinder. Then, multiply the volume by the density of the material to determine the mass.
To calculate the weight of a cylinder, you can use the formula: weight = volume x density x acceleration due to gravity. First, calculate the volume of the cylinder using the formula for the volume of a cylinder (pi x radius^2 x height). Then, multiply the volume by the density of the material the cylinder is made of, and finally, multiply the result by the acceleration due to gravity (typically 9.81 m/s^2) to find the weight in Newtons.
a tube is a hollow cylinder , a cylinder can be hollow or solid - according to my Websters dictionary
If you are going to weigh a liquid in a graduated cylinder, the weight that you will get when you place the cylinder on the scale will be the combined weight of the cylinder and its contents. To find the weight of the contents alone, you therefore have to subtract the weight of the empty cylinder. And to calculate density you need to know both the weight and the volume.
If you are going to weigh a liquid in a graduated cylinder, the weight that you will get when you place the cylinder on the scale will be the combined weight of the cylinder and its contents. To find the weight of the contents alone, you therefore have to subtract the weight of the empty cylinder. And to calculate density you need to know both the weight and the volume.
The hollow cylinder part of the long bone is called the medullary cavity. It is filled with bone marrow and helps reduce the weight of the bone while providing support and flexibility.
Divide the volume by the hieght. The result is the area of the circle forming the cylinder. Divide the area of the circle by PI. Multiply by 4 and then take the square-root. This will be the diameter of cylinder.
you subtract the weight of the water from the weight of the measuring cylinder and you get the volume of the stone