You will need to connect your PS3 to a router, and the router into your broadband modem. You may need to configure port forwarding for your games to work. Go here: http://www.portforward.com/english/routers/port_forwarding/routerindex.htm for a list of routers and how to configure port forwarding.
Configure Port Forwarding or open the below ports in your Router/Firewall. Here's the Port #'s and service:TCP 80UDP 88UDP 3074TCP 3074UDP 53TCP 53
COM port is used to configure a router but you can also get a COM port to USB port adapter which can configure a router using a USB port.
Port forwarding
It strictly depends on the model. Most routers have to be restarted in order to enable port forwarding.
TCP and UDP
When setting up port forwarding, you typically configure it on the WAN (Wide Area Network) side of your router. This allows external devices on the internet to access specific services hosted on your local network (LAN). By forwarding a port from the WAN to the appropriate device's IP address on the LAN, you enable communication between the two networks. Always ensure that your firewall settings are properly configured for security.
These are the basic principles of optimizing a bittorrent client, like BitComet, for speed:Choose a proper port to avoid ISP blocks and conflicts with other programsForward that port through any software firewall and router to allow incoming connectionsAdjust internal settings based upon upload capacity of the internet connection to allow room for outgoing communications and to distribute upload efficiently.Optimizing BitComet for Speedhttp://www.techsupportalert.com/content/optimizing-bitcomet-speed.htm
forwarding packets to the port that is connected to the destination node
forwarding packets to the port that is connected to the destination node
To configure email forwarding in Microsoft Outlook without using GFI, you can go to the "File" tab, select "Rules and Alerts," then click on "New Rule." Choose "Apply rule on messages I receive," select the conditions for forwarding, and then specify the email address to forward to. Finally, save the rule to enable email forwarding.
Try forwarding one account to the other?