You connect your audio leads to the 'aux' input on the amplifier, and the other end to your 'headphones' port. Don't turn up the volume too high on the computer, it will distort.
Set the computer volume, so that distortion doesn't occur and then control the volume on the amplifier.
To connect your Boss Katana amplifier to a computer, you can use a USB cable to connect the amplifier's USB output to a USB port on your computer. This will allow you to record and edit your guitar playing using software on your computer.
there is a plug in on the back of your computer that says amplifier but not all computers have that connection maybe not yours check.
You can look at the in and out connectors on the TV and the amplifier. You have choices that depend on the tv and amplifier, basic stereo, surround sound and tos-link. As you know in and out are connected and out and in are connected. Do not connect in and in to each other and do not connect out and out to each other.
The TV will need to have AUDIO OUTPUT jacks to connect to the speakers or a amplifier to power the speakers and subwoofer.
You sound card should have a audio in port.
Ensure the amplifier is turned off. Connect the positive (+) terminal of the 12V wire to the amplifier's positive terminal and the negative (-) terminal of the 12V wire to the amplifier's negative terminal. Once connected securely, you can then power on the amplifier.
There is no cord that will allow you to record directly from an amplifier into a computer. To record from an amplifier, you have to go through an audio interface.
If your TV has RCA audio outputs, you can connect an amplifier to these outputs to plug in speakers. If it has a headphone jack, you can connect computer-type amplified speakers to this output.
To connect a microphone to speakers, you will need an audio mixer or amplifier. Plug the microphone into the mixer or amplifier using an XLR cable. Then connect the mixer or amplifier to the speakers using audio cables. Adjust the volume levels on the mixer or amplifier to ensure proper sound output.
You connect the mixers main outputs to the inputs of the amplifier and the outputs of the amplifier to speakers
To safely connect an 8 ohm amplifier head to a 16 ohm speaker cabinet, you can use a series connection method. Connect the positive terminal of the amplifier to the positive terminal of the speaker, and then connect the negative terminal of the speaker to the negative terminal of the amplifier. This will create a total impedance of 24 ohms, which is safe for both the amplifier and the speaker.
In general, you cannot connect a pair of speakers to a computer, because the computer's sound board does not normally include a power amplifier fit to drive a speaker.It might be possible to drive very small speakers with a high impedance directly from a sound board's headphone output, though.Note that most "PC Speakers" can be directly connected to a computer's audio output because the speaker itself contains a power amplifier. Strictly speaking, such a speaker is a combination of a loudspeaker and an amplifier (sometimes also called an active speaker).