0
Ok... you have to reset the printer --
How to reset the Canon MP150 after a refill (Step 10 concerns refill; instructions below the steps):
Method1 (Safe Factory Method):
1) Disconnect the printer's power outlet
2) Press and hold the power button while connecting the power outlet back.
3) While still holding down the power button, press the reset button twice.(red circle with a triangle)
4) Release the power button
The printer takes about 10 seconds to show the number 0.
5) Press + to change the value from 0 to 1.
6) When this value is 1, press colour button; this will light up two leds.
One is for plain paper and the other for photo paper. At this point is feed the printer with paper.
7) Press the power button twice and the printer will print a some stuff (if it doesn't print by itself, then press the "color" button once and the test sheet will print). Don't worry much about the printed material. I got some stripped lines and some numbers. I believe that my colour cartridge is clogged which is why I got the green strips.
When you print this sheet the value in the display returns to zero.
8 ) Open the printer cover cover (not the scanner cover) and remove the cartridges. With the printer still open, disconnect the power outlet.
9) Close the lid and turn on the printer.
10) Refill cartridges and place them back in their nice little abode in the printer.
Hpoe this helps
What else can I help you with?
How can I fix the lens error on my Canon S100 camera?
To fix the lens error on your Canon S100 camera, try gently tapping the camera on a flat surface, turning it off and on, or resetting the camera to its factory settings. If these steps do not work, consider contacting Canon customer support for further assistance.
How can I fix the lens error on my Canon PowerShot camera?
To fix a lens error on your Canon PowerShot camera, try gently tapping the camera on a flat surface, turning it off and on again, or resetting the camera to its factory settings. If these steps do not work, consider contacting Canon customer support for further assistance.
Canon powershot sd 1400 always gives the message equals a camera error was detected will shut down automatically restart camera e32 how do you fix that?
my canon power shot sd 1400is always says error E32 ? How do i fix this ? its a new camera
How do you fix canon pixma mp150 e 5 error message?
The Canon Pixma MP150 error E5 typically indicates a problem with the ink cartridges. To fix it, first, ensure the cartridges are correctly installed and seated properly. Remove the cartridges, clean the contact points gently with a lint-free cloth, and then reinsert them securely. If the error persists, check for any obstructions in the printer or consider replacing the cartridges if they are low on ink or defective.
How do you fix autoIt error?
autoIt error how can i fix this problem
How do you fix error 5b04 in canon printer?
Error 5B04 on a Canon printer typically indicates that the ink absorber is full and needs to be reset or replaced. To fix this, you can try resetting the printer by turning it off, unplugging it, and then holding the "Stop" button while plugging it back in. If the error persists, you may need to clean or replace the ink absorber pads, which usually requires disassembling the printer or seeking professional service. Always consult your printer's manual for specific instructions related to your model.
How do you fix a canon pixma 4120?
To fix a Canon Pixma 4120, first identify the issue, such as paper jams, error messages, or connectivity problems. For paper jams, carefully remove any stuck paper from the input and output trays. If you encounter error messages, consult the user manual for specific troubleshooting steps. For connectivity issues, ensure that the printer is properly connected to your network or computer, and try reinstalling the printer drivers if necessary.
How do you fix calibration error on fmc model 4100?
How to fix the error on FMC
How do you fix file integrity error?
How to Fix file integrity violated Error
How do you fix error 489 on android?
How do you fix error code 489 on my android phone
What is an error 99 on the canon eos Rebel xs and how can I fix it?
Error 99 on the Canon EOS Rebel XS typically indicates a generic malfunction, often related to the camera's lens or internal circuitry. To fix it, try removing and reinserting the lens, ensuring it's properly attached. Additionally, check the lens for dirt or obstructions, and if possible, test with a different lens to see if the error persists. If the problem continues, resetting the camera settings or performing a firmware update may help, but if that doesn't resolve the issue, professional servicing could be necessary.
How do you fix Canon G12 lens error?
You can try cleaning the lens to make sure there isn't any dust causing the error. You can also take the card and battery out for about 15 minutes and if your able to get to the menu after doing so do a factory reset on it and see if that fixes the problem.
