To hook up a monitor to a Peavey XR 680E amplifier, first, ensure the amp is powered off. Use a balanced XLR or 1/4-inch TRS cable to connect the monitor output from the amp to the input of your monitor speaker. If you want to use a stage monitor, connect the cable to the appropriate monitor output, usually labeled as "Monitor Out" or "Aux Out." Finally, power on the amp and adjust the monitor level as needed.
this question is really vague. Which amp is better depends on what type of peavey or vox you want and your preference
48 lbs
I thought someone here could answer this question
green channeled amps, if your selected amp is red click in the knob.
I have connected 4 to that mixer and it was too much. You will most likely take out the amp. if you connect 6. Two is about all it can handle.
he uses a Peavey 6505 plus head and Mesa Boogie Rectifier 4x12 straight cabinets
No. To use an MD-12 in as a sound re-enforcement mixer, you will need to have a separate power amp.
The Peavey KBA 100 is a keyboard amplifier, and it has a wattage output of 100 watts. It is designed to provide clear sound and ample power for various instruments, including electric guitars and keyboards. This amp features a stereo input and is versatile enough for both practice and live performances.
Many might say the Marshall MS-2, Peavey Rage 158 or even Roland Cube 20X. The real answer to this question is whichever amp sounds best to you.
A 15 amp hookup refers to an electrical connection that can handle up to 15 amperes of current. This type of hookup is commonly used for household appliances and devices that require a lower power output. It is important to not overload a 15 amp circuit to prevent electrical hazards.
To run a monitor speaker or to connect several amps in series to pre-amp your amp.
wat