answersLogoWhite

0

first when you need to limit time on one of port in router you must confirm your network well;when you got your ping area i ll show you :

open the third & fourth link of this website: computers-internet.co.cc

hope you get answer; good luck !

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

I have a Router with one ethernet port if you got a splitter could you have a Xbox live connection and your present internet connection?

It should work if you have a router with more than 1 port in total....if you have a 1 port router, it's time to upgrade...


How many collision domains with one router and two switches?

In Router one and in switch each port having collision domain.


Is WAN port on cisco router the one labeled internet?

Yes it is.


How do you connect two sepaerate computers using one router?

its so simple...connect them to the RJ45 port of the router and see that the port blinks.this indicates that they r up and running


How do you hook up a cable modem to a wireless router to a ps3 ethernet with out interfering with the wireless in my laptop?

If you connect your modem to the router, and then using one of LAN port (router's) connect the PS3 to the router, you will not interfere with wireless signal at all.


How do you port forward minecraft on a PC with a Verizon Actiontec GT704-WG8 router?

It's just a matter of getting access to the router menu and look for Port Forwarding in one of the options. You then just list the IP address of the hosting computer and the port number. Either get the manual for the router or go online to to the manufacturer website and down load the manual from there. They probably have a support site that will probably explain it for you.If you want, there is free third party software that will port forward without having to use the router. "Port Map" is one of them. I have a Mac so I don't know if they have a Windows version. Just search for something similar.


How do you connect wireless router to HughesNet?

To connect a wireless router to HughesNet, first, connect the router to the HughesNet modem using an Ethernet cable. Plug one end of the cable into the modem's LAN port and the other end into the router's WAN or Internet port. Power on the router, then configure it by accessing its web interface through a connected device, typically by entering an IP address like 192.168.1.1 in a browser. Follow the router's setup instructions to complete the connection.


What is the different between wireless and non wireless networks?

One uses the airwaves, a wireless router sends a signal. The other needs a cable from the router plunged into a port on the PC.


Which port is used to connect your computer to a network?

The "Ethernet Port" Obviously is used for the Ethernet cable which often connects computers to a router. A router is a device that gets the Internet or from the phone/Internet port and routes it to your computer routers are required for ADSL and ADSL2+ to work. Oftener more than one computer is connected to the router. But this setup may be different for "Cable Internet because i have never had cable.


What happens if you start a Cisco router that has no configuration in memory?

Should you start a Cisco router sans config (as is the case when you first purchase it), then it will not do anything but power on - yet. You must attach a cable to the console port of the router on one end, and the serial port of your computer at the other. This can also be done using a rollover cable to connect the router's console port to your computer's ethernet port. Once connected, you can use HyperTerminal, Cutecom, or another serial communication terminal program to see the console input.output from the router. It will ask you if you would like to enter the initial configuration script. Type yes and work from there!


How do you simultaneosly connect two computers to internet using a router and broadband modem?

Plug the two computers in to the router, and connect the router to the modem.The router may have two kinds of ports, one port marked WAN (Wide Area Network) and several ports marked LAN (Local Area Network). If so, the WAN port goes to the modem and the LAN ports are for your computers.That's it.


Can you port forward if you share the same network with other computers?

Yes. Port forwarding is typically done in the router. However, you cannot forward the same port to more than one computer on the network.