How do you load paper in verifone vx510?

Answer 1

open the plastic lid drop the paper roll such that the paper feeds from the bottom

o the roll, pull out an inch o f paper// close the lid , you will hear a click when you close it run a test transaction to check whether receipts are printing!1

Answer 2

They have made it so simple that it's difficult to comprehend.

Step 1. Push down on the little button on the top, right side of the machine that is next to the little symbol that looks like a paper roll.

Step 2. The cover should have popped up. Open it all the way and if there is paper left on the roll NOTE how the paper is feeding off the roll. (From the bottom of the roll towards the buttons of the machine.) Remove the old roll.

Step 3. Take your new roll and pull the glued end away from the roll. Then unroll the paper and cut/tear off the end (including the glued part) so all you have is new clean paper.

Step 4. Unroll the paper about 6 inches.

Step 5. With the loose end of the paper coming from the BOTTOM of the roll towards you, face the front of the machine (buttons) hold the loose end of the paper and drop the roll into the paper cradle.

Step 6. With the loose end of the paper sticking out, close the cover. Then tear off the extra paper .

You're done.

There is no "feeding" of paper. Just drop in, close and go.