Patiently. You will need to draw the full 3 ml 125 times!
Measure to the edge of the plunger (or piston) where it touches the inside of the syringe cylinder. http://www.northcumbriahealth.nhs.uk/palliativecare/clinical/syringe/05.php
If the volume is zero, then there is no volume left in the syringe to measure.
To measure 0.3ml in a 1.875ml syringe, you would fill the syringe up to the 0.3ml mark. This is typically the third smallest mark on the syringe. Make sure to read the measurements carefully to ensure accurate dosing.
0.34 ml on a syringe represents 34 units on the syringe's scale. To measure it, draw the plunger up until the liquid reaches the 0.34 ml mark on the syringe.
It is much easier to just use a insulin syringe and withdraw to .21/2 or .2 and 5 small lines
I work at a hospital and we usually use ml's or cc's depending on the type of syringe.
A gas syringe can typically measure the amount of CO2 produced from burning coal without melting, as it is designed to withstand high temperatures. However, it is important to check the specific temperature range that the syringe can tolerate before using it in a high-temperature environment like burning coal. It is always recommended to use equipment that is designed for such applications to ensure accurate measurements and safety.
Because you can measure the amount of gas
should you use a syringe or med cup to measure dilantin 150 mg liquid
You could use a graduated cylinder or a syringe to measure milliliters (mL). Both tools are designed to accurately measure liquid volume.
A gas syringe is used to measure and dispense liquids or insert and withdraw a volume of gas. These syringes vary in sizes and can collect from 500 ml to 0.25 ml of gas.
using measuring cylinder (if the volume is large) using syringe / needle (if the volume to measure is very small, below 2 ml)