0
Use the supplied tool to program each of the 10 combs.to program a comb use the tool to breakoff specific teeth on each comb.use the whammo 10 comb programing book that comes with the scanner to choose the correct freq for listening. Also
you can use (if you're lucky to have one) a "dfs-5k digital frequency selector.with this accessory,no need for the combs,you just dial up the frequency you like and listen.
What else can I help you with?
How do you switch the locked out channels on a regency scanner Z 10?
Simply press the SCAN button to put the scanner in scanning mode, then press the number button for the channel you want to lockout or unlock. For example, to lockout channel 5, just press the "5" button while scanning; to unlock channel 5, press "5" again. This works for many Regency scanner models.
How do you program a Uden Bearcat 30channel10 Band Radio scanner?
To program a Uden Bearcat 30 Channel 10 Band Radio scanner, first turn on the scanner and select the channel you want to program. Press the "Manual" button to access the channel, then press the "Program" button. Enter the desired frequency using the number keys, and confirm by pressing "Enter." Repeat this process for additional channels, and be sure to save your settings before exiting programming mode.
When was Barcode Scanner - application - created?
Barcode Scanner - application - was created on 2009-10-01.
What does 10-18 mean on the scanner?
quickly
How would i write a program that takes an integer as an input and reverses its digits as an output?
In java you can do it like this: import java.util.Scanner; public class Sample { public static void main(String[] args) { Scanner input = new Scanner(System.in); System.out.print("Input an integer: "); int i = input.nextInt(); System.out.print("reverse:"); while(i != 0) { System.out.print(i % 10); i = i / 10; } } }
Write a java program that accepts 10 numbers and displays sum?
import java.util.Scanner; public class Sum { public static void main(String args[]) { int sum=0; Scanner s=new Scanner(System.in); for(int i=0;i<10;i++) { System.out.printf("enter a number:"); sum+=s.nextInt(); }//end of for }//end of main }//end of class
How do you program a Regency TS-1 Scanner?
To program a Regency TS-1 Scanner, first put it in manual mode and enter the frequency you want on each channel. For example if you are on channel 1 and want to program 154.190, just type the numbers and hit enter.
How do you reset service engine soon light on 1992 Regency Oldsmobile?
To reset the "Service Engine Soon" light on a 1992 Regency Oldsmobile, you can first disconnect the negative battery terminal for about 10 to 15 minutes. This will clear the engine codes and reset the light. Alternatively, if you have access to an OBD-I scanner, you can use it to read and clear the trouble codes, which will also turn off the light. After resetting, ensure that any underlying issues are addressed to prevent the light from coming back on.
Can i install my Xerox 2400 one touch scanner with OSX mac?
I am not familiar with the Xerox 2400 but, if you can make a Macintosh running OS X see the scanner, be it by USB, Wifi, Bluetooth, or even the old SCSI interface, there are generic scanner software that should be able to make it work. How well will it work is another question. Just do a search for 'generic scanner software for OS X.' If the scanner is older than, say 10 years, you may have problems with the Macintosh 'seeing' the scanner. It may be much easier to purchase and inexpensive scanner if it is that old. The inexpensive scanner will be far superior to a 10+ year old scanner.
Police scanner codes for Nevada county California?
10 code
Does the scanner work best with photographs or paper documents?
This scanner works best with paper documents and can scan them in a little as ten seconds for a 10 page document .
How quickly can I scan a 10-page document with the Kodak scanner?
You can scan 10 to 30 pages per minute.
